I saw a picture of John's car on the forum and liked the ride height and stance, so I PM'd him for details and the following is what he wrote back. He also suggested I move the conversation to the forum if anybody else wanted to add their two cents.
Also - Dan/dsags: I'll PM you too but if you have the spring specs handy on the set you had made I'ld love to see them.
Thanks, Rhett
Hi Rhett,
If you are asking about the red convertible's stance, here the details. Yes, after 45 years the springs will get weak. However, our GSs from the factory sit lower than most of us musclecar nuts would like to see. When I restored the convertible, I had the springs specially made and had them add one inch in height to both front and rear springs. I used standard Delco shocks, but found that the back still did not set up as high as I wanted so I put on airshocks in the back. I'm not total satisfied yet so I plan to add a 3/4" or 1" spacer under the rear springs as the air shocks are at their limit now. Dan Ankeny, who goes by "dsags" on the website, recently replaced his springs and shocks to get his stance up in the air with the rear slightly higher than the front. See the gallery for photos. You might also ask him about his details. He needed the room for some larger wheels and tires. I think it looks fantastic. Let me know if you need info on the Coil spring business where Dan and I got our springs made. Pricing was similar to what you'd pay from Year One, Part Place or OPGI.
You made a comment about the orangeish color of your paint. Unless this was a total complete paint job, you might find the original Flame Red paint color by taking off a interior door panel. That is what I did to have a guide when mixing paint to match the original factory red.
Don't hesitate to ask me or post something on the website whenever you have questions. I glad to see that Bob's GS ended up in good hands. It's a great looking convertible. You found a very desirable GS.
John Egel
nut465gs@aol.com