65-66 GS radiator rubber isolators?

[GranSportSedan]

who repops the rubber radiator cushions/isolators? I have the lower brackets but the rubber is not in good shape. I'd love to find repro uppers and lowers if possible

[gssizzler]

I want to say cars out of New Jersey and maybe Steele out of North Carolina! Be prepared for sticker shock!

[GS66]

For the bottom I used strips cut from an old tire on the 66.

[GranSportSedan]

I want to say cars out of New Jersey and maybe Steele out of North Carolina! Be prepared for sticker shock!

looks like $36 plus shipping. 

[gs spoken here]

Yes, per set and you need 2 sets, I sprung for them for my 66, and they are somewhat difficult to install. Soaking in HOT water helps and when you put the radiator in you need to work them into place. A trick to do for the top plate is,if you have used ones with the tabs broken off grind that area flat and get some small rubber bumpers with about the same looking tab and grind off the bumper to very thin and install in the top plate, put the used isolator over the radiator tank and tighten the bolts and it looks like OEM.

[GranSportSedan]

Yes, per set and you need 2 sets, I sprung for them for my 66, and they are somewhat difficult to install. Soaking in HOT water helps and when you put the radiator in you need to work them into place. A trick to do for the top plate is,if you have used ones with the tabs broken off grind that area flat and get some small rubber bumpers with about the same looking tab and grind off the bumper to very thin and install in the top plate, put the used isolator over the radiator tank and tighten the bolts and it looks like OEM.

good advice, thanks.