Exhaust Pipes

[Mark Ascher]

Is there any demand for head pipes and tailpipes made like originals? May have found someone who can make them.

Mark

[Brian]

I thought the ones that Garner Exhaust sells were correct?  If not, what is different?

[Mark Ascher]

Brian,

Gardner will not not sell the headpipes or tailpipes separately. You have to buy the whole system. They have the right headpipes for the 66 Chev,
but I didn't feel I needed to spend $1000 for pipes and mufflers for a driver. I love Gardner exhaust and would use them again in a heartbeat for
a show car, but just can't justify it for the Chev. Had to do some looking.

Mark

[dsags]

Gardner will sell individual pipes to those who have already bought a complete system from them. Bought a set of tail pipes for Loren. Seem to recall they were $300 or so however.

Dan

[65arcticfox]

Magic Muffler in Iowa Falls IA had a program to mold the pipes for my GS They came out very nice for not much money. Talk to Mike  641-648-9487

[Mark Ascher]

This?

[Mark Ascher]

Gardner will sell individual pipes to those who have already bought a complete system from them. Bought a set of tail pipes for Loren. Seem to recall they were $300 or so however.

Dan

Dan,

I would guess that applies to a system the same as what you had already purchased. Not a different vehicle.
I didn't know Gardner would do that.

Mark

[WkillGS]

Downpipes for those that prefer a higher performance header-back system might be useful.
There are lots of header-back systems available, but connecting it to GS exhaust manifolds requires the downpipes. I don't believe those are available anywhere.

[Mark Ascher]

I'll be talking to the contact later today to confirm availability.

Mark

[35chevcoupe]

Mark ,
i,ll be interested in a complete system soon .
I could actually order it anytime .

[Mark Ascher]

Hey John,

I'll let you know. He's supposed to call me tonight. His prices are very reasonable.

mark

[Loren At 65GS]

Mark,

  Are you looking to put together a group purchase?

   Loren

[Mark Ascher]

Loren,

Hadn't thought about it. I'll ask him if something can be done if a group purchase can be put together.
Was really just seeing if there was another resource out there for the parts.

Mark

[Rollaround]

I had a two inch diameter dual exhaust system manufactured and installed on my Special in 2013 by a Midas shop in Shakopee Minnesota.  The shop has (if still there) a computer programmable bending machine with the ability to generate original factory systems.

104 Market St N, Shakopee, MN 55379
 (952) 496-2656

Might be worth a phone call.

[Mark Ascher]

Kevin,

I'll check them out. The blast guy I use is out near that.

Spoke with the exhaust maker tonight. If you are interested in have a stock system made for use with the manifolds, 2 head pipes, 2 tailpipes, post here and we'll try and get a group purchase started.

Mark