looking for a fuse panel

[35chevcoupe]

I,m going to be in need of a fuse panel if someone has an extra . Mine has a minor issue making good contact with the fuses .

[WkillGS]

It's part of the dash wiring harness.
Lectric limited will rebuild them. Check their web page:
http://www.lectriclimited.com/repair_components.htm

or

www.lectriclimited.com

We did find a source for the fuse connectors if you want to repair it yourself.
Another option is to disassemble, blast the connectors clean and replate them.

[Loren At 65GS]

Walt,

 Interested in the connector source.

John,

Another option might be to soak it in Evaporust.  Slow process, but doesn't hurt the plastic.  Then coat connectors with a Di-electric grease.

 Loren

[35chevcoupe]

Walt, Loren ,  It,s way beyond cleaning the terminals .    When I pulled a couple fuses out the terminals turned into dust .
I,m going to look into the site that you posted Walt , looks like a good place . 
 ( Thanks for posting that )

[WkillGS]

Here's the thread on an Olds forum, mentions the rebuild service by American Autowire, and the source for the fuse holder terminals:
http://classicoldsmobile.com/forums/electrical/100157-fuse-block-clips.html

And terminals from DelMar Wire Products:
http://www.delmarwire.com/home/fuse-block-terminals/

Delmar has many items of interest including wire and pigtails.

[GS66]

John, if 66 is the same you can have the one from my parts car.

[Loren At 65GS]

Thanks for the link to Delmar, Walt.

  Loren

[35chevcoupe]

John, if 66 is the same you can have the one from my parts car.

Jim ,
I might be heading down there this week sometime . I,m trying to set up a time to pick up some old barn beams down there so I,ll let you know .
thanks

[Loren At 65GS]

John,

  If Jim's doesn't work from the '66, I found one here that I'm going to clean in Evap-o -rust. Looks pretty decent.

  Loren

[bobbybuick]

I have a Nice bulkhead and dash wiring harness from a 43K mile 65 GS id sell

[35chevcoupe]

John,

  If Jim's doesn't work from the '66, I found one here that I'm going to clean in Evap-o -rust. Looks pretty decent.

  Loren

Loren ,
 I,ll let you know , I,m heading down to Jims friday and then i,ll compare them .   Thank you

[WkillGS]

Looks like '66 is different, has an extra spot for 'radio' .

[Loren At 65GS]

You beat me to it Walt.

I have a '66 harness here that I have to repair for someone and definitely a few '65 to compare with. Just haven't gotten to it yet. It will be interesting to see if the wire locations are all the same for the engine and forward lighting harnesses.

  Loren

[Brian]

While we are on the subject, does anyone have one of the 'Power Options' terminal set that snaps into the fuse box.  The 66 one that Walt posted has it installed and the 65 one on the left does not have it.  One of the terminals is broken off on the one in one of my cars.  The box only had that part in it if the car had PW or Pseat from the factory. 

[35chevcoupe]

Looks like '66 is different, has an extra spot for 'radio' .

Walt ,   Thanks for posting that .
  Ohhh  Looooren I,ll gladly pay you tuesday for a fusebox today !!!!   
Plz save me one of your fuse boxes .   We can figure out the details sometime , just don't thow them out .