Author Topic: 1966 Skylark Parts Car or Project - $900  (Read 2376 times)

0 Members and 1 Guest are viewing this topic.

Offline Rochester

  • Buick Nut
  • ****
  • Posts: 38
1966 Skylark Parts Car or Project - $900
« on: March 09, 2016, 04:29:00 PM »
I have a 66 Skylark Coupe with a 340 4 barrel that I am either going to sell as a parts car or I may part out.  The car has been sitting for about 10 years and the engine is frozen.  I filled the cylinders with Marvel Mystery Oil, so it may free up some time in the future.  There is no title for the car, but I do have a bill of sale from the prior owner.  The floors have rust through in spots, but can be patched...don't think it needs a whole floor.  The trunk floor is pretty solid with some patches in the corners where they usually rust.  The frame seems solid. There is rust on the cowl in front of the windshield.  I plan to keep the pass side fender and inner liner and the two small extension ends on the rear fenders.  I want $900 for the car or will part it out if there is no interest. 
« Last Edit: March 11, 2016, 07:31:30 AM by Rochester »

Offline Rochester

  • Buick Nut
  • ****
  • Posts: 38
Re: 1966 Skylark Parts Car
« Reply #1 on: March 09, 2016, 04:37:09 PM »
More pics
The car is located in PA

Offline Brian

  • Global Moderator
  • Crazy about Buick!
  • *****
  • Posts: 1096
Re: 1966 Skylark Parts Car
« Reply #2 on: March 10, 2016, 07:08:22 AM »
That car is way too nice to part out!  There are ways to free that engine up and get it runnable.  Let me know if you are interested and I can explain how to make a tool you can free up the engine without taking it apart.  I have found that PB blaster works best in the cylinders to help free one up. 
'64 Skylark 2dr ht 4 speed, 300-4
'65 GS ht, 4 speed,2-4s,AC,PS,PB,PW,Pseat,Tilt
'66 Skylark 2dr ht 300-2 automatic
'78 Yamaha DT 400 2 stroke
'88 Ford F-150 4x4 (used to be 4x2)
'89 Ford F-350 4x4
'03 Honda Accord Coupe V6 6-speed manual (daily driver)

Offline Rochester

  • Buick Nut
  • ****
  • Posts: 38
Re: 1966 Skylark Parts Car - $900
« Reply #3 on: March 10, 2016, 08:48:34 AM »
Thanks for the message, but I bought the car for the fender and a few other parts for my 66 Gran Sport.  I have it listed at what I think is a reasonable price, so I hope someone buy the entire car.

Offline 35chevcoupe

  • Crazy about Buick!
  • *****
  • Posts: 1486
Re: 1966 Skylark Parts Car - $900
« Reply #4 on: March 10, 2016, 08:53:15 AM »
Wish it was,t so far away !!!
I like to have the engine .
John Evenson

1930 model A 4 dr sedan
35 chev coupe 2 dr Master Deluxe suicide dr,s
55 chev belair wagon 4dr
59 Buick Invicta 2 dr hd top
65 Buick GS 2 dr ht 3 spd
65 Buick GS Convertible 3 spd
1970 Cuda 440-6
71 Buick GS
84 chev 3/4 ton p/u 6.2 diesel
Yeah there's more
There all projects

Offline Rochester

  • Buick Nut
  • ****
  • Posts: 38
Re: 1966 Skylark Parts Car - $900
« Reply #5 on: March 10, 2016, 09:17:07 AM »
It is the high compression four barrel version. 

Offline wheelz

  • Crazy about Buick!
  • *****
  • Posts: 376
Re: 1966 Skylark Parts Car or Project - $900
« Reply #6 on: March 12, 2016, 07:59:58 AM »
IF you part it out, Please keep me in mind as I am interested in the following:
TAIL LIGHT LENSES if they are NOT CRACKED or broken...
Trunk trim stainless
Tail panel upper and lower aluminum pieces with clips & mounting nuts


Wheelz, Tampa Bay
Wheelz, Tampa Bay

Offline Rochester

  • Buick Nut
  • ****
  • Posts: 38
Re: 1966 Skylark Parts Car or Project - $900
« Reply #7 on: March 12, 2016, 12:56:59 PM »
I think that I have a buyer for the whole car.  I will keep you in mind if things change.

Offline GranSportSedan

  • Crazy about Buick!
  • *****
  • Posts: 303
Re: 1966 Skylark Parts Car or Project - $900
« Reply #8 on: March 12, 2016, 01:21:11 PM »
IF you part it out, Please keep me in mind as I am interested in the following:
TAIL LIGHT LENSES if they are NOT CRACKED or broken...
Trunk trim stainless
Tail panel upper and lower aluminum pieces with clips & mounting nuts


Wheelz, Tampa Bay


Dennis,
that appears to be a Skylark and has the one piece tail panel trim.
Bob
1966 Special Deluxe
1941 Buick Sedanette
2021 Jeep Gladiator Diesel

Offline genebp

  • Buick Fan
  • ***
  • Posts: 5
Re: 1966 Skylark Parts Car or Project - $900
« Reply #9 on: April 08, 2016, 06:16:32 PM »
Where are you located in Pa ? Can I get contact information ?

Offline Rochester

  • Buick Nut
  • ****
  • Posts: 38
Re: 1966 Skylark Parts Car or Project - $900
« Reply #10 on: April 08, 2016, 07:49:27 PM »
Pretty sure the car is sold...buyer basically wanted the engine.  I will re-post if things change.

Offline Les M.

  • Crazy about Buick!
  • *****
  • Posts: 71
Re: 1966 Skylark Parts Car or Project - $900
« Reply #11 on: June 06, 2016, 07:31:05 PM »
If you decide to part it out I would be interested in all the brackets and pulleys that are needed from alternator, water pump, crank pulley. I am not sure that this is the right parts but being you have the car there is a big plus. I am trying to go from a non air 340 car and are not sure what I need. I am going to put an under the dash unit in. Any help would be appreciated. Thank you, Les

Offline Rochester

  • Buick Nut
  • ****
  • Posts: 38
Re: 1966 Skylark Parts Car or Project - $900
« Reply #12 on: June 07, 2016, 06:37:56 AM »
The car has been sold,