dual quad reproduction linkage

[gssizzler]

Dual quad linkage for sale, reproduction of the first type! turnbuckle is made of stainless ( can be polished, for some bling!) and block is made of tool steel ,only have a limited number of these
and they will not be made again! price $110 MADE IN THE USA these fit stock qaud sets! original and repro are in pics thanks! Jon  

[Chris]

Very impressive part, I just wish I had the rest of the stuff.   ;D

One day I'll be running dual quads...

Chris

[Brian]

Which type is correct for a '65--the first type as reproduced here, or the second type that has a formed sheet metal piece instead of the block for the bolt to slide in?  The setup on my '65 has the 2nd type on it. 

[nut465gs]

Jon,

Very nicely done. I knew you planned to reproduce them, but hadn't seen where you were marketing them. Glad that you listed them here on the website. Very well done.

Brian,

Here's a bulletin from March 12, 1965. I'd think that either style would be correct for our '65s.

John

[Loren At 65GS]

Thanks John !
 I thought I remembered something about there being a bulletin.

Good work .

Loren

[gssizzler]

John ,thanks for posting the bulletin, I could not get it to come up ! to answer Brain's question both linkages are correct! the first type was used on the 64-65 set-ups, the second was used as a replacement in 65 and used for the 66 setups! Jon

[gssizzler]

Still have a few of these!

[35chevcoupe]

jon , ill take one .

[red65gs]

Nice work! Looks good!

[mdkd]

Jon

Looks like I have what I need for my setup

Thanks

[wheelspin]

jon , ill take one .

Hi Jon,
I would like to purchase your dq linkage. How would you like to be paid?

Les Iden (wheelspin)

[gssizzler]

Let me see if I have one left! The first sets of this I made over 22 years ago! Man where does time go!

[gssizzler]

I have 2 left! So I do have 1 for you wheelspin pm sent

[SkippyG]

Any chance you have these measurements? I?m helping @Wheelspin do the installation. Pedal to floor the carbs are half open only. Weber copies of Carters from Edelbrock. I know the fix. Measurements would help pickup some time.

[gssizzler]

So the approximate length is 9 inches back of bolt head to center of rear clip which goes over the ball stud! The length is subject to adjustment and in 65 there were 2 different front carbs that had lever arms that were different in height! A early and later carb so the length would even be different on these!