dual quad coil mounting bracket

[35chevcoupe]

 Does anyone have a photo of a dual quad coil bracket ?

[dsags]

John, believe it's the same as the regular coil bracket just mounts in a different place on the intake manifold.

[cwmcobra]

John, believe it's the same as the regular coil bracket just mounts in a different place on the intake manifold.

Dan's picture shows the same bracket and location as the one on my 4-speed car.  Two votes for this one!

Chuck

[gs spoken here]

With the coil in that position, will it clear the modified linkage for the throttle, that you have to make for the 2X4 set up on Skylark GS?

[35chevcoupe]

Dan , Chuck ,    Thanks for the photo and the info .
There was one on Ebay so I grabbed it .   Another piece to the puzzle !   
Now if I can get some  time to finish taking the car apart so I can start on the body work .
Dan ,  If everything works out I hope to see you this weekend sometime . not sure when i,m leaving for Jefferson yet but I,ll let you know .
U GUYS R THE GREATEST 

[dsags]

With the coil in that position, will it clear the modified linkage for the throttle, that you have to make for the 2X4 set up on Skylark GS?

Bill, check out this prior post  http://65gs.com/board/index.php?topic=602.0

Dan

[gssizzler]

John , Dan  you want to be at Jefferson on Friday by 10 am this is when it opens I will be there if you want to get together pm me we could go look at my post car and my buddy Ron's cars. Mark Ascher talk about coming down to!

[cwmcobra]

With the coil in that position, will it clear the modified linkage for the throttle, that you have to make for the 2X4 set up on Skylark GS?

Here is a picture of the throttle linkage and coil before I disassembled.  Everything clears fine.  Brian's advice of turning the coil so the connections are out of the way is a good one!

Cheers!

Chuck