65 Skylark & GS Parts Sources

[BuickGS65]

A few internal dash parts from the GTO also fit the 65 Skylark. All parts relate to the "high beam" indicator light inside the speedometer. (all Group 9.750):

"High beam" cardboard sleeve/tube #6455866 - Ames #A389F (will need to trim +/- 3/8" off)
Rubber gasket/seal for "high beam" tube #1586219 - Ames #A389J
Red "high beam" light bulb filter #6407597 - Ames #A389



Reproduction dash printed circuit (#6408779) is available from OPGI - #S230240

[BuickGS65]

The 65 GS manual transmission clutch release clip is now reproduced; just need to add your 1505 bearing.
This is a reproduction of 1319083.

Sold by Bob's Automobilia. Part # BC-395

http://bobsautomobilia.com/clutch-items/1938-58-throwout-bearing-clip-assembly-.-bc-395/

https://www.ebay.com/itm/BUICK-1939-40-41-47-48-49-50-51-52-53-54-55-56-Clutch-Release-clip-assy-1319083/123041529455

Ebay name: buickcar


More info in this thread: http://65gs.com/board/index.php/topic,2563.msg15997.html#msg15997

[BuickGS65]

CORRECT dash turn signal filters (green) are reproduced by Loren. 

Group 9.750, Part # 6407604

More info here: http://65gs.com/board/index.php/topic,3848.0.html

[telriv]

Under NailHead engine parts please add:

   Forged pistons with pins, pin fitting & rings
   Neoprene front & rear seals with directions
   ALL engine parts ALL quality, mostly USA made. Sourced from diff. areas. If not will state.
   Rebuild of AFB carbs. incl. throttle shaft bushings. No recoloring
   Rebuild, recurve & install electronic ignition 1 wire conversions. Painted color of choice
   
I'm just a small volume seller. So some pricing may not be competitive.

Tom Telesco
   
 

[BuickGS65]

Heater Hoses with Correct bends:

Ecklers Corvette - Part #  25-253203-1

See this thread for more info: http://65gs.com/board/index.php/topic,4181

[BuickGS65]

Steering wheel recasting (using your core)
Koch's Steering Wheels www.kochs.com (VW restoration website; their steering wheel website is under construction)
See this thread: http://65gs.com/board/index.php/topic,3876.0.html


Dash Pad restoration (using your core)
Dash Pad Pros http://www.dashpadpros.com (727) 409-7972
see this thread: http://65gs.com/board/index.php/topic,3050.0.html

[BuickGS65]

Gas tank filler neck rubber dust shield
(Rubber flap that is stapled to the car - tucked behind rear bumper - above gas tank filler neck)
Rubber The Right Way
Part #15-004M
www.rubbertherightway.com

[BuickGS65]

Automatic & Manual Console Parts

ThePartsPlaceInc.com

Shorty console pad (available in black & white(?)) CP10723S
Shorty console emblem CP10815S

Manual console upper boot trim ring CP1011S
Manual console shift boot retainer CP1234S

[elagache]

Dear Dan and mid-60s Buick caregivers with a bent for doing things yourself,

Automatic & Manual Console Parts

ThePartsPlaceInc.com
. . . . . 
Shorty console emblem CP10815S

Hmm, very interesting!  Here is the direct link to The Parts Place webpage:

https://www.thepartsplaceinc.com/product/buick-skylark-gs-regal-gn-console-door-tri-shield-emblem/56416

Of course it is great news for restorers, but it would be just as wonderful if installed in a custom-made console or other piece of interior trim.  For many years, my trusty wagon had a generic "saddle console" that went in between the front passengers on the bench seat.  I have wanted to build my own that fit and looked better.  I just might incorporate that emblem into that project!

Cheers, Edouard 

[BuickGS65]

Heater and A/C Control Cables - upgraded with metal mounting tabs instead of plastic
https://www.oldairproducts.com/ Part #26-1365 (non a/c; heater only)
http://autoacsolutions.com/ (877) 542- 8192  airparts8775428192 on eBay

'65 GS A/C Condenser
http://autoacsolutions.com/ (877) 542- 8192  airparts8775428192 on eBay; part # 5601220
http://65gs.com/board/index.php/topic,4619.msg34551

Date-Coded Distributor ID Tags
Chicago Corvette contact@chicagocorvette.net (708) 458-2500 GrayGracy on eBay
http://65gs.com/board/index.php/topic,4594
1111083 & 1111055 are the correct Skylark or GS tag #'s
Date code format: First number is year (i.e., 1965 = "5"), next is a letter (e.g., "B" = February), finally a number that is the day of the month. So "5 B 16" = February 16, 1965

[BuickGS65]

1965 Buick Skylark GS - "throwout" 1505 bearing

Group 0.799 pn 1367058
Used on 1939-48, 53-60, 63-66 Nailheads.

One of the industry numbers for it is B1505-C
ACDelco   CT901S
SKF   N1145
SEALED POWER   C-6061
GM   1319083
GM   1367058
L&S Bearing   TT1145H

See above for 65 GS manual transmission clutch release clip info

[seanrobison65]

Emblemagic has a notice on their website saying that they are downgrading their business to a hobby. They won?t take rear center emblem inserts if cracks or crazing are present, and they don?t have any more inserts available to sell. Sadly, it seems this vendor is no longer a resource for us. I am searching for another company who can provide this service, but haven?t found anything yet.

[BuickGS65]

Glovebox Guide Arm Grommet
the glovebox arm passes through this hole - information here: http://65gs.com/board/index.php/topic,4640.0.html

[BuickGS65]

Gran Sport "pancake" style air cleaner - AIR FILTER
Cross Reference:
   AC Delco A85C
   Purolator A60030 (discontinued)
   K&N E1910 (still available)
   GM 5645342
   Fram (yikes!) CA178PL
   Motorcraft FA30
   NAPA 2092 (still available????)
   WIX 42092
   CHAMPION AF30 (still available)
   Hastings AF26

[BuickGS65]

Date-Coded Wiper Motor Decals
Information available here: http://65gs.com/board/index.php?topic=4698
Made by Don Lightfoot. See www.angelfire.com/rock/69ss/ for info. Or email at SedanSS69 <a  t  > hotmail.com