Ginky Weeds Restoration Project

[cwmcobra]

Progress has been slow due to "other stuff" going on.  But I did manage to get the firewall and floor pans covered with noise and heat reducing materials.  I chose to use products from RAAMAudio.com including RAAMat and Ensolite PS in this package: http://www.raamaudio.com/package-1-20-sheets-of-raammat-bxt-ii-37-5-sq-ft-and-3-yards-ofensolite-iuo-peel-and-stick-41-625-sq-ft/. 

First I installed the RAAMat (silver color).  It's kind of like Dynamat, but thinner, more pliable and I think easier to apply.  That is mostly intended to deaden noise from the engine compartment and the road.  I know, it probably won't make much difference in a convertible with the inherent wind noise, but I'm more hoping to reduce heat in the passenger compartment.  And that's where the Ensolite is recommended because it is a better thermal barrier than RAAMat.  Ensolite (black color) is applied over top of the RAAMat.  Both have adhesive backing for "press and stick" installation.  And both together are said to be superior to Dynamat in both noise and heat reduction and are cheaper to boot.

Pictures attached.  Now I feel like I can start putting the interior together, as time allows.

Chuck

[elagache]

Dear Chuck and mid-60s Buick owners with way too busy lives, . . . .

Progress has been slow due to "other stuff" going on. 

I hear ya' brother . . . . . . 

But I did manage to get the firewall and floor pans covered with noise and heat reducing materials.  I chose to use products from RAAMAudio.com including RAAMat and Ensolite PS in this package

Hmm, very interesting!    I have Dynamat on the firewall of my trusty wagon, but no where else.  Dynamat is a bit thick and hard to apply.  This could be very useful!

Thanks for sharing!    I've bookmarked this outfit for future reference!

Cheers, Edouard 

[cwmcobra]

Wow, over a year since I've posted an update.  Last year was not a good one for progress.  Feels good to get back at it!

Finished up the dash today.  Makes the interior look alot farther along.  Had the radio "tuned up", so hoping it will be in better working order. 

Made some progress on the engine bay and A/C system also.  Hopefully, I'll be installing the core support, radiator, etc. soon.

 

Chuck

[GS66]

Really looks great. I had forgot you were running dual quads too!

[cwmcobra]

Thanks Jim.  Those carbs are placeholders until I receive the correct ones from Carmen.  Hopefully soon!

Chuck

[35chevcoupe]

Looks nice Chuck .  I'm so far off schedule I don't even remember when we were going to debut our cars together . We,ll have to come up with a plan at Robs party this year . Keep up the fine work .

[elagache]

Dear Chuck, Jim, John, and mid-60s Buick restorers

Great to see that you back on task and putting the car together! 

What did you have to do to the radio to get it working again?

Cheers, Edouard 

[Rollaround]

It is wonderful you have found time to get back in the grove and of course it looks great; I’m so jealous. 
The soundproofing/thermo-shield is interesting. Is the exposed black finish surface smooth plastic or a textured fabric?
Glenn and I are planing a road trip to your place, probably early next month just to get our Buick project fix and maybe do lunch.

[schlepcar]

I don't know how anybody that does that nice of work ever gets anything done.

[cwmcobra]

Thanks Guys!

John - It's a date.  Let's put our heads together at the meet.

Edouard - The radio was repaired and tuner aligned by an old school radio tech in Ohio.  He was recommended by my restoration mentor and it turns out he's located only 20 minutes from our family, so we are in his neighborhood frequently.

Kevin - The black material is cellular and definitely not shiny.  You guys are always welcome.  Just check first to make sure I'm not visiting your state at the time...

Dan - Guilty....it's only been five years since I started this project and it definitely feels like I don't get much done!  Let's see how long it takes for my next post 

Cheers!

Chuck

[cwmcobra]

Received my restored carburetors from Carmen today.  And had to install them right away.  They look like jewelry to me.....Sure perks up the engine bay!

Chuck

[cwmcobra]

Carb identification.....

[cwmcobra]

Also working on adding paint to the grille, headlight doors, rear emblem and taillights.  Here's the completed grille.

Chuck

[35chevcoupe]

WOW Chuck , Those are beautiful looking carbs . Grill looks great too .
MAN I GOTTA GET MOTIVATED !   I think after the AACA meet in Auburn I,ll get back on the car .
Nice work , keep it up .

[mdkd]

WOW Chuck

Considering it jewelry is an understatement!

Very nice indeed.

Milton