I ordered 5 of the Mr. Gasket lug nuts just to check them out and you are correct that they are about 1/8" taller than the original lug nuts. The seat on them does not look like the one in the picture you attached though. It matches up well with the seat on the originals and on the reproduction ones I just bought from you.
I also figured out something yesterday that may help some people out. As we discussed somewhere on here before, the chrome wheel lug nuts are 13/16" compared to 3/4" hex for the standard wheel lug nuts. If someone is trying to find the correct 13/16" lug wrench they can be hard to find. I figured out yesterday that the lug wrench in the 80-96 Ford F150 trucks is a 13/16". The bend in the end is slightly less and the handle is about 2" longer. I quickly remedied the angle issue by heating it with the torch until red and bent it to the same angle as my original 13/16" lug wrench. I then cut the handle to the correct length and re-shaped the cut end to a 'blade' with an angle grinder. I will post a picture in a few days once the gray paint dries. Looks just like the original 13/16" one I have, and they are very plentiful in junkyards.