65GS.com - Buick Gran Sport Enthusiasts!

Classifieds => Parts Wanted => Topic started by: kcombs on April 26, 2010, 11:31:37 PM

Title: still looking for a power steering pump brace for a 65 GS
Post by: kcombs on April 26, 2010, 11:31:37 PM

I still need the brace from the power steering pump brackets to the engine mount area. From pictures I have seen of the part it is 3/16 or 1/4 inch by about one inch bar stock with a bolt hole and a slight bend at each end . It should be around 12 inches long (this is a wild guess). Please PM me if you have one you would be willing to sell. OR if you are willing to post a shop drawing of the part, should you have one laying around that you can measure.

Title: Re: still looking for a power steering pump brace for a 65 GS
Post by: Loren At 65GS on July 10, 2010, 08:26:09 AM

Kurt,
I see that you haven't got a response yet. I'll check to see if the GS chassis I got from Brian S. still has it on.

Loren

Title: Re: still looking for a power steering pump brace for a 65 GS
Post by: gs spoken here on September 10, 2010, 04:24:06 PM

Kurt, if Loran does not have one I have an extra on a motor I will sell, thanks Bill.

Title: Re: still looking for a power steering pump brace for a 65 GS
Post by: Loren At 65GS on September 11, 2010, 09:38:17 AM

Kurt,
I do have one that I could copy or make a pattern of. I need it for the up coming GS restoration. It looks like Bill has what you need.

Loren

Title: Re: still looking for a power steering pump brace for a 65 GS
Post by: buickrestrr on September 12, 2010, 04:38:33 PM

I have one, pay shipping and its yours,   Mike

Title: Re: still looking for a power steering pump brace for a 65 GS
Post by: kcombs on October 03, 2010, 12:24:10 AM

Thanks guys, I found the part.  I haven't been on the site for awhile. Been adding a 450 foot room upstairs for my wife and haven't been able to make into my shop. The upstairs addition has become a much bigger project than I expects. Anyway I plan to get back to work on the Bucamino as soon as I can, but it may be a month or two...