65GS.com - Buick Gran Sport Enthusiasts!

Classifieds => Part & Car Leads => Topic started by: Mark Ascher on March 08, 2010, 01:30:43 PM

Title: Unknown Motor Mounts - Photos Attached
Post by: Mark Ascher on March 08, 2010, 01:30:43 PM

Anyone know what these might be for?
They are supposed to be Buick, maybe 67-68. Unknown engine.

PN is 1239760

Mark

Title: Re: Unknown Motor Mounts - Photos Attached
Post by: Loren At 65GS on March 08, 2010, 05:19:23 PM

 :dontknow:Checked my master parts book, no luck.  It goes to '69, so I'm thinking "maybe newer".

Loren

Title: Re: Unknown Motor Mounts - Photos Attached
Post by: Brian on March 09, 2010, 07:15:41 AM

Those appear to be 300 engine mounts.  In fact, they look alot like the 64 300 engine mounts.  The 64 mounts were narrower between the two mounting tabs and the frame tower was taller, so the rubber part of the mount is not as thick.  If you measure the distance between the inside of the tabs and let me know, I will compare to one I have laying in the shed and tell you if they are 64 or if they are 65-67 300 mounts. 

Title: Re: Unknown Motor Mounts - Photos Attached
Post by: Mark Ascher on March 10, 2010, 07:15:42 AM

Brian,

Let me know what you find out. Thanks!

Mark

Title: Re: Unknown Motor Mounts - Photos Attached
Post by: Brian on March 11, 2010, 07:49:10 AM

I have an original 64 300 mount I measured and it is 2.25" between the two tabs that fit over the frame tower.  If the ones you have are wider than that (more like 2.5"), then they are the '65-'67 300 mounts. 

Title: Re: Unknown Motor Mounts - Photos Attached
Post by: WkillGS on March 11, 2010, 08:05:31 AM

That part number is listed for
1964 V6 less AC
1965 40-41-42-43-4400 V8 (Special-Skylark, and LeSabre)

Title: Re: Unknown Motor Mounts - Photos Attached
Post by: Mark Ascher on March 11, 2010, 04:50:47 PM

Loren, Walt, Brian,

Thanks for the info! I'll pass it along.
They are for sale if anyone needs them.

Mark