65GS.com - Buick Gran Sport Enthusiasts!

Classifieds => Parts Wanted => Topic started by: dlmwtvl on January 04, 2020, 09:09:47 AM

Title: Wanted: A pair of engine mount frame pads, for a 65 GS.
Post by: dlmwtvl on January 04, 2020, 09:09:47 AM

Hello, I am looking to buy a set of engine mount frame pads for a 65 Skylark Gran Sport.
Thank you.

Title: Re: Wanted: A pair of engine mount frame pads, for a 65 GS.
Post by: yachtsmanbill on January 04, 2020, 11:04:23 AM

For what engine?   Bill

Title: Re: Wanted: A pair of engine mount frame pads, for a 65 GS.
Post by: dlmwtvl on January 04, 2020, 06:45:16 PM

401 Nailhead

Title: Re: Wanted: A pair of engine mount frame pads, for a 65 GS.
Post by: yachtsmanbill on January 04, 2020, 06:54:01 PM

Not too sure but maybe, I pulled the 1964 V-6 mounts and kept them. Their yours for postage if theyll work for you. I changed mine out for a 455 transplant.   Bill

Title: Re: Wanted: A pair of engine mount frame pads, for a 65 GS.
Post by: jmos4 on January 05, 2020, 09:25:55 AM

Hi,

65/66 Gran Sport only
Also require motor plates, believe they reproduced the rubber mounts

I have a broken set if your interested, but would take a few days to dig up

Regards,

Title: Re: Wanted: A pair of engine mount frame pads, for a 65 GS.
Post by: marxjunk on February 02, 2020, 01:29:05 PM

i dont think they repop the engine side, you have to send them off to have re vulcanized..

i havent checked in a while...

Title: Re: Wanted: A pair of engine mount frame pads, for a 65 GS.
Post by: dsags on February 02, 2020, 02:27:46 PM

https://www.buickfarm.com/gm-group-0-clutch-engine/1372540/engine-mount-lh-or-rh-nors (https://www.buickfarm.com/gm-group-0-clutch-engine/1372540/engine-mount-lh-or-rh-nors)

$79 per side. That’s less than the cost to re-vulcanize.

Dan

Title: Re: Wanted: A pair of engine mount frame pads, for a 65 GS.
Post by: jmos4 on February 02, 2020, 04:16:13 PM

Hi again,

Not mine but here's the whole set

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F133323588801 (https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F133323588801)

Regards,

Title: Re: Wanted: A pair of engine mount frame pads, for a 65 GS.
Post by: wheelz on May 03, 2020, 02:17:16 PM

I have a couple sets of cast iron LONG motor mount adapter brackets if you still need a set. . .

Wheelz, Tampa Bay