65GS.com - Buick Gran Sport Enthusiasts!

Classifieds => Parts Wanted => Topic started by: Spicoli on July 20, 2016, 01:14:16 PM

Title: Need 5 pin ignition switch pigtail
Post by: Spicoli on July 20, 2016, 01:14:16 PM

As noted in a different thread posted under Electrical, I recently replaced my ignition switch (easy to find through Summit), but in the process discovered the 5 pin pigtail connector (i.e., the female end) was partially fried - specifically, the plastic surrounding the push connector for the "battery" post had been badly melted in the past. Anyone have a clean one - preferable with the retention clips still functional, but not absolutely necessary. (Loren, any luck digging one up?).

Alan

Title: Re: Need 5 pin ignition switch pigtail
Post by: Loren At 65GS on July 20, 2016, 05:00:58 PM

Alan,

 The one I came up with has only one retention clip not broken.  Also no luck on an ignition switch. Must have sold all the NOS ones I had.

  Loren