65GS.com - Buick Gran Sport Enthusiasts!

Classifieds => Parts Wanted => Topic started by: tsollazo on November 05, 2014, 11:11:49 PM

Title: Need this piece of floor metal please!
Post by: tsollazo on November 05, 2014, 11:11:49 PM

A previous owner hacked up the floor for a MT or Floor shift trans. Anyone have a parts car they can cut the section outlined in white out from?  :occasion14:

Thanks!

Tony

Title: Re: Need this piece of floor metal please!
Post by: schlepcar on November 06, 2014, 10:51:30 AM

I guess it depends on what you are going to do. I think the one I saved was cut out around the console so I could save the shifter and console backets. It was an automatic on the floor so it also had a small hole in it. I believe it is a pretty large cut. I also have an auto on the column parts car with no holes in the floor, Dan

Title: Re: Need this piece of floor metal please!
Post by: tsollazo on November 06, 2014, 09:30:06 PM

Hi Dan,

I'd like the column shift one, without the hole. It's going in a column shift car.

Thanks!

Tony

Title: Re: Need this piece of floor metal please!
Post by: Dr Frankenbuick on November 07, 2014, 09:30:20 AM

I have the left and right floor     pan repos from year one. I am in eastern pa, but don't know where you are.


Sent from my iPhone using Tapatalk

Title: Re: Need this piece of floor metal please!
Post by: schlepcar on November 07, 2014, 05:22:44 PM

I am in Michigan,so I do not know how much it would be to ship a large floor cut to your location. You can send me a PM with your info,and I would let you know,Dan

Title: Re: Need this piece of floor metal please!
Post by: wheelz on November 22, 2014, 01:22:27 AM

Tony..I have a decent floor hump (AUTO, floor console with brackets) off one of my 65 GS parts cars.... I would be very willing to work something out with you IF, key word, IF, I can find someone willing to cut out a 65/66 MANUAL SHIFT FACTORY FLOOR HUMP for me?

I am also posting this request in parts Wanted...

Wheelz, Tampa Bay   

Title: Re: Need this piece of floor metal please!
Post by: goatsaver on February 25, 2015, 10:42:58 AM

Tony,
Have good hump off donor car if you've not found one - has no holes
I can cut as long and wide as you need - send me measurements
how can we ship it?
Roger