65GS.com - Buick Gran Sport Enthusiasts!
Projects & Restorations => Projects & Restorations => Topic started by: bobbybuick on July 08, 2013, 05:05:23 PM
-
If these are OEM I think I'm going to clean up and try to use them. Im using the stock Dist and just cleaned didn't restore
(http://farm6.staticflickr.com/5324/9243878208_a7b3c3ac30_b.jpg)
(http://farm6.staticflickr.com/5349/9243879432_bce63427f5_c.jpg)
-
Those would be correct for your GS. It also appears , by the date code on the wire, they may be originals.
Loren
-
Yes I am going to clean them up tonight and ohm them out.I also didnt restore the distributor as it had the oem ring on it.look at the clutch boot it cleaned up nice
OLD delco cap also
(http://farm3.staticflickr.com/2811/9241080979_2a1124dd44_c.jpg)
(http://farm4.staticflickr.com/3722/9243860696_f096a19bd3_c.jpg)
Also restoring OEM coil tonight
-
Nice, Bobby.
The pics are terrific.
Loren
-
Those are all really nice. If the plug wires don't check out Lectric Ltd http://www.lectriclimited.com/mainpage.htm (http://www.lectriclimited.com/mainpage.htm) sells an exact copy with the 1st Q date for $80. Hope they work for you though. Great job.
-
Didn't know that these were reproduced. $ aren't too bad either.
Loren
-
Those are the wires I bought. You need to save or scrounge the original plug boots though.
Mark
-
Here is the picture from Lectric Ltd. Shows the correct boot. Maybe they upgraded them.
-
Dan, maybe so. I had to grab an old set of GM boots from eBay. Those boots pictured did not come on the set I bought.
Mark