65GS.com - Buick Gran Sport Enthusiasts!
Interior & Tops => Interiors => Topic started by: BuickGS65 on January 22, 2012, 02:38:44 PM
-
Are the correct '65 Skylark/GS door lock knob ferrules reproduced? Thanks
-
Try this web site www.oldbuickparts.com (http://www.oldbuickparts.com) part # BF-647
-
Legendary Interiors makes a reproduction - BT64GAFERRULE (clear plastic) $5.00/pr. Do not know if they are correct however.
Dan
-
Ames has the correct ones. Don't know the PN, you should be able to find it on their website.
Mark
-
I checked Ames, but they aren't what I'm looking for. I will post a picture soon.
-
I checked Ames, but they aren't what I'm looking for. I will post a picture soon.
Aren't these the factory-correct dook lock ferrules?
-
Hi Dan,
Here's a photo of a factory original from my convertible that I'm curently restoring. It measures 3/4" in diameter. Is your photo of a repro ferrule?
John
-
Hi Dan,
Here's a photo of a factory original from my convertible that I'm curently restoring. It measures 3/4" in diameter. Is your photo of a repro ferrule?
John
Hi John:
My picture is the same as yours. The repros Mark mentioned that Ames has do not match our picutres. Do you know if these are reproduced? Thanks
-
Dan,
Off hand, I do not know of any repro ferrules for our '65s. I am sure that you have already checked the usual aftermarket suppliers. Good luck and let us know if you find a source.
John
-
Still looking for AT LEAST one more correct ferrule, as pictured above. Please let me know if you can help. Thanks.
-
Dan,
I was looking through the Fusick Olds catalog a few weeks ago.
Might want to call them. They list an "exact" reproduction.
Mark
-
Dan,
I have two mediocre door ferrules. If interested I can post pictures tomorrow.
-
Here are some pictures of the ferrules. The first shows my mediocre correct ferrule. The second shows the inside of a correct ferrule (no plastic covering), the clear or translucent ferrule received from a vendor and the correct used ferrule.
-
Thanks, Dan.
I really could use the better looking correct used ferrule in the first picture. Please let me know if it's available. Thanks.
Dan
-
Dan,
Its yours. PM me with the address to send it to.
-
Anyone have any more of these?
Mark
-
Dan - PM sent
Mark - the Fusick ones are also incorrect. I will keep my eyes out for more.
-
Dan,
Sounds good. I really only need one. There is a swap meet this weekend, so I'll keep my eyes open.
Mark
-
Dan,
Its yours. PM me with the address to send it to.
Thanks Dan! The parts arrived yesterday. :occasion14:
-
Good news. Hope at least one of them is useable.
Dan
-
I think I just found a correct reproduction! :headbang: Just ordered a pair. I will post the results once they arrive. Stay tuned!
-
Dan,
Any news on these?
Mark
-
CORRECT REPRODUCTIONS ARE MADE.
Part # 4839529 which became # 7619151
Fit 61-64? Impalas
Available from various Impala part suppliers. Made by reproduction company named "Fargo"
More info here: http://65gs.com/board/index.php/topic,1430.msg7993.html#msg7993 (http://65gs.com/board/index.php/topic,1430.msg7993.html#msg7993)