65GS.com - Buick Gran Sport Enthusiasts!
Interior & Tops => Interiors => Topic started by: Jonesy on September 02, 2012, 04:15:24 PM
-
I pulled my rear seat today in order to detail the interior of the car, which was filthy by the way, and I found this. It was hog ringed to the seat spring. It has some of the same info that's found on my Cowl tag.
-
Sweeet! What plant was your car from ? If it's pliable try and scan it in if you can.
DL
-
Those are common on '66's as well. Don't think all '65's had them.
It's the body build (broadcast) sheet from Fischer Body. It'll list the options/mods required on the main body, but won't list all the detail items like springs, sway bars, etc, etc. That info is shown in a different build sheet.... which is rarely found on the early GS's.
-
Good to know Walt. DL, my car was built the first week of May at the Baltimore plant. Here is a scan of the sheet. That didn't turn out well so I took a pic also.
-
Good to know Walt. DL, my car was built the first week of May at the Baltimore plant. Here is a scan of the sheet. That didn't turn out well so I took a pic also.
One week after my car then. 4th Week April in Baltimore. Perhaps I'll get lucky too.
DL
-
My car is a first week of June build from Baltimore, and when I had the back seat out to install seat belts a few years ago, I looked for the build sheet but didn't find it. It didn't look like the back seat had been out of the car, at least if it had, it was a long long time ago, based on the stuff I found under the seat!!
Keith