65GS.com - Buick Gran Sport Enthusiasts!
Drivetrain => Rims & Tires => Topic started by: cwmcobra on January 15, 2018, 06:37:59 AM
-
Any good replacement acorn lug nuts out there? I know Mitch Romanowski offers some that are not quite right. I recall a thread a couple of years ago on a project to make stainless reproductions, but I'm not aware that it got off the ground.
Thanks for the inputs!
Chuck
-
Jon Thompson did make up a few sets in stainless steel. They were very nice. Who knows, someone may have a set they would be willing to part with.
Dan
-
Thanks Dan. If anyone has a set of Jon's reproductions that you'd like to part with, please PM me.
Chuck
-
Thanks Dan. If anyone has a set of Jon's reproductions that you'd like to part with, please PM me.
Chuck
PM sent. :thumbsup:
-
The ones offered by CARS are close. Even the Mr Gasket acorn nuts are similar to stock.
You choice depends on how 'correct' you want and your budget.
-
Could look into doing these again ! I know it has been 2 years since I last had done this ! I was unable to do them because of the cost and I was knee deep in Doctor bills!
-
I would do a small run of these ,have two sets sold so would like see if there is interest still from 7 or 8 people! Best price as the machine shop had kept the drawings and cutting programs is $215 before shipping and not polished! :headbang:
-
I would do a small run of these ,have two sets sold so would like see if there is interest still from 7 or 8 people! Best price as the machine shop had kept the drawings and cutting programs is $215 before shipping and not polished! :headbang:
I'd be down to jump onboard for a set.
-
These will be in production soon! :headbang:
-
I,m in for a set .
-
These are in production hope to have all of them in my hands by the end of the month !
-
Jon
Can I still get in on this?
Milton
-
Yep for sure! I will put you down for a set! I would have liked to combine the original post but can't!
-
Just in case you guys forgot how nice these look with the road wheels! I will have the lug nuts by tomorrow!
-
There here! :headbang: I will pm every one from this post and from the original post! Best deal I can come up with is about. $60 for polishing if anyone is interested! Only seven sets not spoken for!
-
Jon , I would be interested in having them polished .
pm sent
-
Jon
Will send PM requesting polishing
Milton
-
Guy's thanks for your purchases! Sure wish more things where able to be made for our cars!
-
I am down to 5 sets left! have some sold to local people! Thanks everyone!
-
4 sets left! Thanks again!
-
Down to 3 sets! Thanks again everybody!
-
One unpolished set left ! NO PlANS TO EVER MAKE THESE AGAIN!
-
Fusick Cutlass catalog #53C page 39 shows "new reproduction" of acorn lug nuts # WN713 set of 20 for $100.00. Did anyone look at these, and are they correct for the GS?
-
I want to say these are 3/4 hex ?, not the 13/16 that the originals are! They are a nice repo though!
I would check with Fusick and see what size hex they are! They could be used, but be mindful of the cone
on the lug as they will wreck the nut seats on the wheel if not right!
-
Sold Out! Thanks
-
Finally called Fusick...they are the 3/4" hex.
-
Ok,! Good to know! I believe the ones inline tube and others sell are also 3/4 hex!