65GS.com - Buick Gran Sport Enthusiasts!

Drivetrain => The Nailhead => Topic started by: option B9 on October 01, 2016, 07:59:33 PM

Title: photos of brake booster vacume line needed..
Post by: option B9 on October 01, 2016, 07:59:33 PM

I'm installing a "Right Stuff"front disc brake conversion kit that i ordered from Summit on my 65GS coupe project, we are taking our time and everything is going on as it should..  :help:I don't remember how the steel vacuum line is run from the AFB to the rubber hose to the booster. could one of you please post a photo of this area so i can bend the 3/8 line once and go on to the next thing.  Thanks,   Tony

Title: Re: photos of brake booster vacume line needed..
Post by: schlepcar on October 01, 2016, 09:05:15 PM

I can't find a pic,but there is a tee on the rear center of the AFB that goes to the booster on driver side and Pcv valve on passenger side valve cover.

Title: Re: photos of brake booster vacume line needed..
Post by: dsags on October 02, 2016, 06:55:01 AM

This a photo of the one on Mark Ascher's car.

Dan

Title: Re: photos of brake booster vacume line needed..
Post by: option B9 on October 02, 2016, 06:15:10 PM

Thanks everyone, I pulled that tee off of a AFB in the scrapyard years ago, I knew that i or someone else would need it someday !! And thanks for the photo that was a big help. I will try to run the line the same way, or as close to it depending on the way the booster sits. Thanks again.  :wave: Tony