65GS.com - Buick Gran Sport Enthusiasts!
Drivetrain => Transmissions => Topic started by: rooneygs on September 21, 2014, 08:23:09 PM
-
does anyone know where i can get bushings for clutch linkage 66 skylark gs. specificlly for the clutch release shaft where it comes through bell housingthanks
-
That is an item you will have to have someone make for you on a lathe. They are not reproduced. Good news is that is a very easy item to make.
-
So I'll take it to a machine shop and have it made thanks Brian, Johnny
-
I had my machine shop do this, just make sure the bearings are aligned in the bell housing.
-
Is there a recommended material for the bushings? Delrin perhaps?