65GS 3 speed convertible basket case under restoration

[WkillGS]

Great to hear it's coming together John!
Check the piston dome to cyl head chamber clearance.... there have been reports of the corner of the piston dome hitting the chamber. You can use clay for the test.  What brand pistons are those?

[35chevcoupe]

Hey John,

No problem with the photos.  They enlarged nicely.  Carbs from Carmen or someone else?

Chuck

Thanks Chuck , thats good to know .
Carmen still has my 1st set of carbs so decided to try something/someone else . I did some digging and found the exact screws that hold the choke and throttle plates in so that i could remove them for cleaning . Then I don't know if you remember or met Frank Freidman ( Marks friend ) I think he was at Robs get together he use to have , anyway he was getting ready to do some dual quad carbs for his 409 Impala so we got together and he ended up doing them all . He must have had 20 AFBs there , it was a sight  .
Wish i had some pictures as it ended up looking like the Carter AFB assembly plant . LOL
He did an awesome job .

[35chevcoupe]

Great to hear it's coming together John!
Check the piston dome to cyl head chamber clearance.... there have been reports of the corner of the piston dome hitting the chamber. You can use clay for the test.  What brand pistons are those?

Thanks Walt , I ll make sure to check that . Especially since it will be a true 10.25 to 1 comp ratio engine .
I believe the pistons are from racetech , the guy that did my heads got them and works quite a bit with racetech as he does a lot of muscle car engine rebuilding .

[GS66]

Looks like the carbs turned out great!

[WkillGS]

Thanks Walt , I ll make sure to check that . Especially since it will be a true 10.25 to 1 comp ratio engine .
I believe the pistons are from racetech , the guy that did my heads got them and works quite a bit with racetech as he does a lot of muscle car engine rebuilding .

Good to hear, the Racetec/Autotec are likely the best Nailhead pistons on the market. Tom T worked with them on the design. The dome-chamber clearance issue was brought up by Matt/Russ Martin, so it's worth checking into since they do a lot of NH builds.

[35chevcoupe]

little up date on the 65 GS convert engine . After 18 months i was FINALLY able to pick everything up , so hopefully now i can start to assemble everything .

[35chevcoupe]

photos

[35chevcoupe]

more

[cwmcobra]

Very nice John. Good to see progress with your project. Will you be focusing time on the rest of the project over the winter? Still working on the house and property?

Chuck

[elagache]

Dear John, Chuck, and mid-60s Buick restorers,

Thanks for the update.  As I'm sure you have noticed, everything takes longer than anyone would prefer.  When it comes to take care of classic cars you need an awful lot of patience! 

Edouard

[35chevcoupe]

Very nice John. Good to see progress with your project. Will you be focusing time on the rest of the project over the winter? Still working on the house and property?

Chuck

Chuck I am wrapping up the house project now and should be finished with it by the first of the year . Putting polyurethane on the floors tomorrow and then towel holders , grab bars and misc items . Still waiting on the siding to come but should have that any day now .
This house project has about put me in funny farm but i think i am gonna make it .
And YES I'll be on the 65s this winter and can't wait . I actually have been tinkering around out in the shop but not just on Buick stuff .
I just completed a 1953 Mercury flathead build that we dyoned yesterday , man that thing turned out SWEET !!!

[GS66]

Hope you are driving it next year!

[cwmcobra]

Very cool flathead! Glad to hear you can enjoy the winter months on Buick projects that have been placed on the back burner for so long. Will look forward to your updates along the way!

Chuck

[gssizzler]

Progress! Yes Sir moving forward!