Author Topic: 65 Non Tilt Turn Signal Control with Upper Bearing Adapter and Bearing Assembly (Read 900 times)

Joe65SkylarkGS · « **on:** August 09, 2009, 07:51:16 PM »

I fixed my brake light issue and in doing so I saw a really worn Turn Signal Control. This is the plastic piece that accepts the column harness and also is what the cancelling cam is connected to. It has the Upper Bearings and there are only a few bearings left in there!!

So I could use a New or good Used one.

Thanks fellas.

Page 373

http://65gs.com/65%20Chassis%20Service%20Manual/1965%20BUICK%20SPECIAL%20CHASSIS%20SERVICE%20MANUALindex.html

Joe65SkylarkGS · « **Reply #1 on:** August 12, 2009, 05:35:06 PM »

Nobody's got one?

Author Topic: 65 Non Tilt Turn Signal Control with Upper Bearing Adapter and Bearing Assembly (Read 900 times)

Joe65SkylarkGS

65 Non Tilt Turn Signal Control with Upper Bearing Adapter and Bearing Assembly

Joe65SkylarkGS

Re: 65 Non Tilt Turn Signal Control with Upper Bearing Adapter and Bearing Assembly