rear window trim-65 sedan

[gsbuick65]

can somebody tell me how many pieces the inner trim has on the rear window of a sedan? OPGI states 3 pieces, 2 Ls and a center attaching piece, but the angle is wrong. My car didnt have anything so I dont know. Im think it uses 5 pieces. 1 long one across the top, 2 short one along the sides and 2 L's, or is that just on the hardtop?

[Brian]

Sedan uses three pieces--two long ones that have the upper turns in them and a connector piece in the middle.  The bottom L's are made up by left/right metal pieces that screw to the painted metal strip along the bottom inside edge of the window. 
  Hardtop cars have 5 pieces as you described. 

[gsbuick65]

thanks brian, can you get me a picture? these pieces OPGI sent me dont have the right curve to them. I'm missing the bottom L's too
 

[BuickGS65]

How about these? I have them on my '65 Skylark coupe:

http://www.trimparts.com/Pages/Results.asp?VehicleCat=21&ProductCat=10

[gsbuick65]

nope, them are for a h/t, I figured out how they fit, they just dont fit real good. :(