Author Topic: Looking for some '66 information  (Read 4196 times)

0 Members and 1 Guest are viewing this topic.

Offline Brian

  • Global Moderator
  • Crazy about Buick!
  • *****
  • Posts: 1096
Looking for some '66 information
« on: September 28, 2009, 01:43:39 PM »
I know there are some guys on here with 1966 cars and thought maybe someone could help me with some information.  I have a 66 Skyark (not a GS) and for many years now have been searching for a factory vacuum truck release setup for it.  I figure I am going to have to buy the pieces separately (already have the correct button), but I have never actually seen what the correct actuator looks like for a '66 Skylark.  The service manual shows a representation of it, but I need to see a good picture of one so I will know when I find the right one. 
  On that same note, if someone has or knows where I could find one, I would really appreciate that information too! 
'64 Skylark 2dr ht 4 speed, 300-4
'65 GS ht, 4 speed,2-4s,AC,PS,PB,PW,Pseat,Tilt
'66 Skylark 2dr ht 300-2 automatic
'78 Yamaha DT 400 2 stroke
'88 Ford F-150 4x4 (used to be 4x2)
'89 Ford F-350 4x4
'03 Honda Accord Coupe V6 6-speed manual (daily driver)

Offline WkillGS

  • Administrator
  • Crazy about Buick!
  • *****
  • Posts: 1992
Re: Looking for some '66 information
« Reply #1 on: September 29, 2009, 09:24:07 AM »
Brian, I don't have a trunk release. But I do have 2 pages from the 66 assembly manual that show the installation.
« Last Edit: September 29, 2009, 09:25:50 AM by WkillGS »
Walt K
Eastern Pa

66 GS Astro Blue/blue 425 auto
66 GS Silver Mist/black 401 4 spd
66 GS Flame Red/black 401 5 spd
66 GS Saddle Mist/black 401 L76 auto
66 Special Flame Red/black 300 5 spd
65 GS vert Verde Green/ Saddle buckets 401 4 spd
79 Turbo Regal

Offline Brian

  • Global Moderator
  • Crazy about Buick!
  • *****
  • Posts: 1096
Re: Looking for some '66 information
« Reply #2 on: September 29, 2009, 02:36:26 PM »
Thanks for the information Walt.  Those are the same two pictures that are in the '66 Chasis service manual in the accessories section.   I have an idea what the actuator looks like from that picture, but I need a detailed picture of it so I can find the right one.  Also, the way that picture shows it mounted is impossible if you look how the structure for the truck latch mechanism is made in the trunk--it can't hang out past the structure at an angle like shown in that picture--the structure is right in the way in that area. 
'64 Skylark 2dr ht 4 speed, 300-4
'65 GS ht, 4 speed,2-4s,AC,PS,PB,PW,Pseat,Tilt
'66 Skylark 2dr ht 300-2 automatic
'78 Yamaha DT 400 2 stroke
'88 Ford F-150 4x4 (used to be 4x2)
'89 Ford F-350 4x4
'03 Honda Accord Coupe V6 6-speed manual (daily driver)

Offline WkillGS

  • Administrator
  • Crazy about Buick!
  • *****
  • Posts: 1992
Re: Looking for some '66 information
« Reply #3 on: October 01, 2009, 10:10:26 PM »
Brian, I saw a setup from a 63-65 Riv at the Carlise swap meet today. I took a few pics for you.
The 63-64 actuator produces a vacuum when you pull the knob out. The 65 actuator relies on a separate vacuum can connected to the engine. I didn't ask the price.
If you would like the guys contact info, send me a PM.

Walt K
Eastern Pa

66 GS Astro Blue/blue 425 auto
66 GS Silver Mist/black 401 4 spd
66 GS Flame Red/black 401 5 spd
66 GS Saddle Mist/black 401 L76 auto
66 Special Flame Red/black 300 5 spd
65 GS vert Verde Green/ Saddle buckets 401 4 spd
79 Turbo Regal

Offline GS66

  • Crazy about Buick!
  • *****
  • Posts: 2300
Re: Looking for some '66 information
« Reply #4 on: December 29, 2013, 03:14:33 PM »
As usual, late to the party but just found this so here are some pics from one of our 66 Gran Sports. Might still help someone.



Jim
North Mankato, MN

65 Gran Sport HT auto
66 Gran Sport Conv. 4 speed
66 Gran Sport Conv auto
66 Gran Sport Post auto
66 Gran Sport HT auto

Offline Brian

  • Global Moderator
  • Crazy about Buick!
  • *****
  • Posts: 1096
Re: Looking for some '66 information
« Reply #5 on: December 30, 2013, 07:17:56 AM »
That is definitely different than what is shown in the service manual!   Since I originally started this thread, I have installed the setup on my '66 that is shown in the service manual.  I had to cut out the side of the trunk latch support to match the different style shown in the service manual, but that was actually pretty easy.   Walt had a car with open sided style trunk latch support and made a paper pattern off of it for me.  This is what it looks like once I completed it--works perfectly and looks just like the setup in the manual:
'64 Skylark 2dr ht 4 speed, 300-4
'65 GS ht, 4 speed,2-4s,AC,PS,PB,PW,Pseat,Tilt
'66 Skylark 2dr ht 300-2 automatic
'78 Yamaha DT 400 2 stroke
'88 Ford F-150 4x4 (used to be 4x2)
'89 Ford F-350 4x4
'03 Honda Accord Coupe V6 6-speed manual (daily driver)

Offline GS66

  • Crazy about Buick!
  • *****
  • Posts: 2300
Re: Looking for some '66 information
« Reply #6 on: December 30, 2013, 11:35:47 AM »
Mine was supposedly dealer installed when the car was new but who knows for sure.
« Last Edit: December 30, 2013, 06:46:59 PM by GS66 »
Jim
North Mankato, MN

65 Gran Sport HT auto
66 Gran Sport Conv. 4 speed
66 Gran Sport Conv auto
66 Gran Sport Post auto
66 Gran Sport HT auto