I ordered a set of E brake cables, from Inline Tube, through Ebay, for my 66 GS 4 speed car. $99.00 shipped. All look good correct, and the front and rear and large hook measure the same as what I took off the car. Still looking for the old center cable to confirm it is the same length. Having problems installing the front cable, I should have installed it after the body was back on the frame and before the front end was put on the car or before the drivers inner fender was installed, but I did not have the new set and installed the inner fender and fender as one unit. It would be easy to install if the inner fender was not in the car. I have been able to snake a wire from above through the upper E brake hole in the frame, and may be able to pull the cable up by threading it thought the frame mount hole. then thread the other end out the frame hole for the E brake cable. Will follow up on the install.
