photos of brake booster vacume line needed..

[option B9]

I'm installing a "Right Stuff"front disc brake conversion kit that i ordered from Summit on my 65GS coupe project, we are taking our time and everything is going on as it should..  :help:I don't remember how the steel vacuum line is run from the AFB to the rubber hose to the booster. could one of you please post a photo of this area so i can bend the 3/8 line once and go on to the next thing.  Thanks,   Tony

[schlepcar]

I can't find a pic,but there is a tee on the rear center of the AFB that goes to the booster on driver side and Pcv valve on passenger side valve cover.

[dsags]

This a photo of the one on Mark Ascher's car.

Dan

[option B9]

Thanks everyone, I pulled that tee off of a AFB in the scrapyard years ago, I knew that i or someone else would need it someday !! And thanks for the photo that was a big help. I will try to run the line the same way, or as close to it depending on the way the booster sits. Thanks again.  Tony