3 speed shifter and radiator core support X braces

[35chevcoupe]

I,m looking to buy a factory 3 speed shifter for my 65 GS . Also need the radiator X braces . there is a set of X braces on Ebay for 115.00 but would rather have the $$$$ go to someone here on the 65 site .
let me know what you have  ...

[GS66]

Are the braces the same on a 66GS?

[35chevcoupe]

good question Jim , let me do some checking .
If they are does that mean you have a set ?

Jim , from what I'm seeing the 64 and 65 are the same but i,m not sure about 66 .
maybe someone else can help us out on this 

[gssizzler]

Cross braces are different all three years! 64's are straight
These were used in early 65 on downflow radiator cars , not
GS's as they are crossflow.65's have a bump out to clear the
Center hood latch brace.66's are straight and short as they
Go to different points on the core support!

[35chevcoupe]

Thanks gssizzler , I wasnt sure . 

[bobbybuick]

.do these look right? should be ....threads need chased but blasted and painted matte Black,will NEED Top Coated
i can check length if you like but these are off my spare 65 $60 plus shipping will be 10-15 dollars im afraid

[Rollaround]

Bobby does your spare car have AC?

I seem to recall that AC cars used a brace with a bow at the bottom for condenser clearance.   

[bobbybuick]

Bobby does your spare car have AC?

I seem to recall that AC cars used a brace with a bow at the bottom for condenser clearance.

No neither had AC but both ha the bow in the X Brace

[Mark Ascher]

All the GS cars had the x braces with the bow. Skylarks were straight.

Mark

[35chevcoupe]

Just noticed that I posted this under cars wanted instead of parts wanted .
 

Bobbybuick are the threads on the one rod strong enough to hold ?   ( they look a little rotted )
shoot me a price , if nothing else i can repair the end .

[bobbybuick]

Just noticed that I posted this under cars wanted instead of parts wanted .
 

Bobbybuick are the threads on the one rod strong enough to hold ?   ( they look a little rotted )
shoot me a price , if nothing else i can repair the end .

you could just rethread them it looks like there is enough there to me .i posted the price below 60 plus shipping

[35chevcoupe]

OK , i,ll take them .
send me a pm on the total and how you would like to get paid .
Thank you .

[35chevcoupe]

Still need a 3 speed shifter and linkage

[bobbybuick]

just paypal me the 60 it will have the address attached and i will print a label to get you the shipping balance

Just noticed that I posted this under cars wanted instead of parts wanted .
 

Bobbybuick are the threads on the one rod strong enough to hold ?   ( they look a little rotted )
shoot me a price , if nothing else i can repair the end .

you could just rethread them it looks like there is enough there to me .i posted the price below 60 plus shipping

[35chevcoupe]

bobbybuick pm sent .