65GS.com - Buick Gran Sport Enthusiasts!
General Discussion => General Discussion => Topic started by: Loren At 65GS on September 22, 2016, 06:22:39 PM
-
I am going to revisit this topic. It was brought up previously by one of the members here, generated some interest and then died.
I contacted Dash Pad Pros in regards to making a reproduction of the '65 Skylark dash pad.
Cost would be $464 each plus a core and shipping both ways.
Initial run is a minimum of 12 units. Black is the standard. Colors run an additional $25
There would be a core charge, if you can not supply one.
Will need a solid commitment to go forward with this. So post here, please.
Loren
-
I would definitely be in for at least one,but I need to see how many core pads I have.
-
Loren - Interesting. How would it work for other colors? I guess dye your own?
Dwaine
-
Loren - Interesting. How would it work for other colors? I guess dye your own?
Dwaine
Dwaine,
I need to research that yet.
September 23 update to this question.
DPP can dye them to factory color for an additional $25.
Loren
-
Buddy had done was okay but grain was wrong i didn't care for it .
-
I'm planning on the just dashes route for arm rest pads and dash pad this winter. Ive heard most of the other options result in the wrong grain. I only want to do it once,hopefully the additional $$ will be worth it.
-
Buddy had done was okay but grain was wrong i didn't care for it .
Interesting. Had heard that the Dash Pad Pros '67 dash pad had the correct grain and that the Just Dashes dash pads had the wrong grain for our cars.
Can anyone confirm the correctness of either suppliers grain pattern ?
Dan
-
I'm planning on the just dashes route for arm rest pads and dash pad this winter. Ive heard most of the other options result in the wrong grain. I only want to do it once,hopefully the additional $$ will be worth it.
I spoke to Dash Pad Pros this morning to get some more information.
I will be receiving a sample of the vinyl that will be used to cover these. So when it arrives, I can confirm that it is correct.
Also we can have them dyed in factory colors for an additional $25.
There is a core charge of $165 if you don't have one.
Hope this additional information is useful.
Loren
-
Loren , if the vinyl is correct i.d be good for one .
As far as the core goes , does it matter how bad of shape its in ? I have 2 but would like to send in the worst one as my original is driver quality . It.s not like its bent or anything but the vinyl is really bad .
-
Buddy had done was okay but grain was wrong i didn't care for it .
Interesting, Dash Pad Pros have not done a '65 pad as of yet.
Are you possibly referring to Just Dashes?
Loren
-
Loren , if the vinyl is correct i.d be good for one .
As far as the core goes , does it matter how bad of shape its in ? I have 2 but would like to send in the worst one as my original is driver quality . It.s not like its bent or anything but the vinyl is really bad .
John,
What is needed as a core is a good solid metal. That is the base for the pad. I have a good pad that will be used as a pattern to make a mold for the replacement foam.
Maybe I need to clarify the process.
Dash Pad Pros [DPP] will strip the pad of the old vinyl and foam, then apply new foam, followed by new correct grain vinyl. If you need a pad other then in black color, then there is an additional $25 charge.
The end product would result in a pad identical to an original.
Unlike another option, the original foam is not used. This results in a soft pad like it was in 1965.
Hope this helps,
Loren
-
If the grain is right, i'd be up for one too. I am checking with JD on their grain match.
-
I might be interested as well. Searching for my core tomorrow.
-
Depending on the time frame, I'm in
-
Hello Loren
I would by one, thanks for doing the research
Joe
-
Depending on the time frame, I'm in
Time frame will be determined partly by how fast we have at least 12 commitments and money submitted for this.
Personally, I don't need any dash pads for my cars and I'm not doing this as a capital venture. The posted costs are the actual cost from Dash Pad Pros to produce 12 pads.
Should we be able to have 24 pads done on the first run, the cost to Dash Pad Pros will go down and so would the price to those first 24 persons.
Loren
-
Loren,
Thanks for doing the legwork on this. You can count me in for one.
JimL
-
Hello Loren
If you don't get twelve I would still be interested even if the cost goes up.
Thanks again
Joe
-
Hello Loren
If you don't get twelve I would still be interested even if the cost goes up.
Thanks again
Joe
If we can not get 12 prepaid orders, the project will most likely stop.
Loren
-
I found three cores with all the mounting clips still attached. I definitely need one for myself,and would donate the other two for the project. If anybody wants to commit to the extra cores,maybe would could get enough for an initial run.
-
Good idea, Dan. I also have a core that I can donate. Fortunately, I don't need a dashpad, but have a spare from my parts car. If it moves anyone to commit for a redo, consider it yours.
Chuck
-
Looks like we're at 9.
-
Put me down for one.
Where are Dash Pad Pros Located, Florida?
John
-
Put me down for one.
Where are Dash Pad Pros Located, Florida?
John
Going by the area code, Tampa , Florida area.
Loren
-
Looks like we're at 9.
I see these 5 as certain:
JimL
joereich
Black wedge
Schlepcar
35chevcoupe
mdkd
RABABODS
I see these 4 as possible:
Buick 65
BuickGS65
giottoman
Weldar
jmos4
Let me know if I have misunderstood the commitment of any of the above.
Loren
-
for me it will be a matter of timing. so you have it right from my stand point.
-
Loren
Any ball park on shipping to 55079
Milton
-
Milton, email sent.
Dan
-
Loren
I am still in as a certain, But I still have one more show I want to attend on Oct 15th before I can remove my dash pad for a core.
JimL
-
Jim
I have one you can borrow until it comes back, I can even help you install it I have done many times.
We are so close we can probably ship them together and save frienght.
Joe
-
Joe
Thanks for the offer. We'll see how things progress, it might be a while (if ever) before there are 12 commitments for the project.
JimL.
-
Loren
Count me in as a certain for a dash pad in gray to fit a white interior.
I think I have a usable core.
Does the 64 dash core happen to be the same as the 65?
Thanks Dan A for the update.
Milton
-
Loren
Count me in as a certain for a dash pad in gray to fit a white interior.
I think I have a usable core.
Does the 64 dash core happen to be the same as the 65?
Thanks Dan A for the update.
Milton
Will mark you down , Milton.
The '65 is one year only. The '64 is just a dash surround, no pad over the glove box.
Loren
-
Loren , I checked the dash pad on my parts car and it,s not useably as a core the metal underneath is rusted thru .
But if I can come up with a another core ( or 2 ) and we are close to making the 12 I have an :idea1: .
sending you a PM
-
I believe I have an extra one there is also one on eBay
Joe
-
Dear Loren and mid-60s Buick lovers, . . . . :love4:
The '65 is one year only. The '64 is just a dash surround, no pad over the glove box.
Yes, that's true, but that makes the passenger side look a little "naked." Could you fit a 1965 pad into a 1964 dash without too much pain?
That's definitely a "no-no" from the originality standpoint, but it might be nicer for a daily driver. Perhaps there are some 1964 owners out there who would want to upgrade.
Just curious, . . . .
Edouard
-
Hey Loren,
I would like to be put on the list as a maybe, all depends on when you will need the deposit or full payment, as I am currently rebuilding my rear end (burned up the posi).
I have at least 2 cores, maybe a third if someone needs one.
Let me know what's next when you get the 12 or more.
Has anyone posted this on V8 Buick as might get more interest as well as maybe some more contributors on this site.
Regards,
-
Hey Loren
Just registered, count me in for at least one dash pad. I have at least 3 laying around
incase anyone might need one?
-
Hey Loren,
I would like to be put on the list as a maybe, all depends on when you will need the deposit or full payment, as I am currently rebuilding my rear end (burned up the posi).
I have at least 2 cores, maybe a third if someone needs one.
Let me know what's next when you get the 12 or more.
Has anyone posted this on V8 Buick as might get more interest as well as maybe some more contributors on this site.
Regards,
I posted this to v8Buick and to the BCA forum with a link to 65GS.com, thanks for asking.
I tried to put it on Team Buick, but was unable to sign in.
There are 8 for certain and 5 possible as of today.
Loren
-
Please refresh my memory - there are 2 nuts on the RH side of the dashpad (covered by glovebox insert), and once those nuts are removed, the dashpad just "unclips" by pulling it forward?
-
Loren - I am in for one.
Dwaine
-
Please refresh my memory - there are 2 nuts on the RH side of the dashpad (covered by glovebox insert), and once those nuts are removed, the dashpad just "unclips" by pulling it forward?
Don't forget the instrument surround also has some screws that go into the dash pad. Plus, there are some 'clips' on the underside of the dash pad that go through holes in the dashboard.
Dan
-
Count me as certain.
-
Dear Loren and mid-60s Buick caregivers,
I posted this to v8Buick
It's my bad but I can't seem to locate your post on V-8 Buick. Could you give us a pointer? I'm curious to know how the "natives" over there received it.
Cheers, Edouard
-
Dear Loren and mid-60s Buick caregivers,
I posted this to v8Buick
It's my bad but I can't seem to locate your post on V-8 Buick. Could you give us a pointer? I'm curious to know how the "natives" over there received it.
Cheers, Edouard
http://www.v8buick.com/showthread.php?314674-1965-Skylark-Dash-Pad-Project (http://www.v8buick.com/showthread.php?314674-1965-Skylark-Dash-Pad-Project)
-
Hi All
Are we now at 10 for certain and 2 possibles? :-)
getting closer!
-
Dear Walt, JimL, and mid-60s Buick parts seekers,
It's my bad but I can't seem to locate your post on V-8 Buick. Could you give us a pointer? I'm curious to know how the "natives" over there received it.
[url]http://www.v8buick.com/showthread.php?314674-1965-Skylark-Dash-Pad-Project[/url] ([url]http://www.v8buick.com/showthread.php?314674-1965-Skylark-Dash-Pad-Project[/url])
Thanks Walt!
I decided to post V-8 Buick my question about whether or not you could retrofit a 1965 dash pad into a 1964 Buick A-body:
http://www.v8buick.com/showthread.php?314791-Retrofit-a-1965-dash-pad-into-a-1964-Buick-A-body&p=2619164#post2619164 (http://www.v8buick.com/showthread.php?314791-Retrofit-a-1965-dash-pad-into-a-1964-Buick-A-body&p=2619164#post2619164)
Even if proposed swap is completely impossible, it is the sort of idea that tends to generate a conversation. On that very busy board, asking a question seems to generate more activity than offering them help. Just the nature of the psychology over there. . . . . :dontknow:
Cheers, Edouard :occasion14:
P.S. I wish I could contribute more directly to this group buy, but when I sent my trusty wagon's dash pad to our local upholster to make whatever repairs were needed, all he could do was wipe off some dried 303 protectant! The dash pad was perfect after (at the time) 48 years! As if there was any doubt, keeping your car in the garage most of the time will really prolong the life of every component!
-
Hi All
Are we now at 10 for certain and 2 possibles? :-)
getting closer!
Yes , we are at 10. Two more and this can be a viable project.
Loren
-
Loren:
Please lock me in - if you havent done so already. Thanks
-
Loren:
Please lock me in - if you havent done so already. Thanks
Thanks Dan, this puts it at 11 certain.
Still working on nailing down the grain pattern with DPP.
Loren
-
TTT
All we need is one more...come on guys let's get this done!
-
I would send in two cores if someone wants to commit to one. I do not see this getting any cheaper in the future and chances are not too good that these will ever be reproduced.
-
With having two 65s, I suppose I could use a spare. And I have a useable core. I'll be number 12.
A great weekend to all!
Chuck
-
Good thought Chuck. I might be in for one too. Believe Loren has to confirm that the grain is correct yet. Also, for each pad over the initial 12 believe we all get a discount because the next batch would have a lower cost per pad.
Is the above correct Loren ?
Dan
-
Good thought Chuck. I might be in for one too. Believe Loren has to confirm that the grain is correct yet. Also, for each pad over the initial 12 believe we all get a discount because the next batch would have a lower cost per pad.
Is the above correct Loren ?
Dan
Yes, it is correct that the cost would go down.
There is a sizeable cost to making the mold and the initial run is bearing that cost. In regards to end cost per pad, it would depend on the total count of the initial run. As it stands the price is for an initial 12 pads. One or two more may not have a significant change in that price.
I've been told DPP has 3 different grains of vinyl. I received a sample of one of the vinyl on Tuesday. The grain is not correct and I have already spoken to them about it.
As a result, I removed a section of vinyl from one of my pads and sent it to DPP. Waiting to hear back on that.
Lastly, expected time frame would be approximately 3 months once the actual project is started. There is also the details in regards to getting the cores and payment to DPP to work out.
Presently that is all the information I have.
Hoping this project will continue and I have not created false hope,
Loren
-
I am very interested in this deal but have not finalized the purchase of the 65 I am considering yet due to hurricane type weather where the car is located. now that you have your minimum required to proceed how long do I have to get onboard before it's too late?
-
I think you may have some time. Details still have to be ironed out with DPP.
Loren
-
Hey Loren,
Have you gotten any word on the vinyl?
When I did my seats Legendary sold me some Madrid patterned vinyl for my arm rest which I believe is correct for the seats and arm rest, not sure on the dash but maybe a option for a source of material.
I would like to commit, but still need a few weeks before my bank account to say yes. Please let me know before you pull the trigger.
Regards,
-
Hey Loren,
Have you gotten any word on the vinyl?
When I did my seats Legendary sold me some Madrid patterned vinyl for my arm rest which I believe is correct for the seats and arm rest, not sure on the dash but maybe a option for a source of material.
I would like to commit, but still need a few weeks before my bank account to say yes. Please let me know before you pull the trigger.
Regards,
Well, funny thing you should ask about the vinyl.
Yesterday, I received the three samples of vinyl that the manufacturer uses and they have a vinyl that appears to be a very good match to the original.
With that said, we are looking good for this to proceed. I'm waiting for a return call from the manufacturer to answer some final questions I have about proceeding.
Thanks for asking Jim,
Loren
-
Here we go!
The count down is ended . It is launch time to go on this.
I just got off the phone with the manufacturer and I have nothing but good news.
First off,
I need to send the total cost to the manufacturer in one payment. That said, I need collect payment of $464/ pad plus $35.00 return shipping . If you want a color other than black, add $25.00
The quicker I can send payment and a pad for making the mold, the faster this gets started.
Paypal or personal check to me.
Secondly, colors other than black are an additional $ 25.00 and must be included with payment.
You will need to send your core directly to the manufacturer. This will keep from having additional shipping charges by not sending them to me. Pm or email me for the address of the manufacturer.
At this time it is looking to be approximately a three month lead time for turn around. Your finished pad will be shipped directly from the manufacturer to you. Return shipping will run $35.00
Total to me is $499.00 plus color charge of $25.00 if necessary.
Loren
-
Loren,
Great News !! Check will be mailed out tomorrow.
Dan
-
Loren,
Great News !! Check will be mailed out tomorrow.
Dan
Thank you , Dan
Loren
-
Here we go!
The count down is ended . It is launch time to go on this.
I just got off the phone with the manufacturer and I have nothing but good news.
First off,
I need to send the total cost to the manufacturer in one payment. That said, I need collect payment of $464/ pad plus $35.00 return shipping . If you want a color other than black, add $25.00
The quicker I can send payment and a pad for making the mold, the faster this gets started.
Paypal or personal check to me.
Secondly, colors other than black are an additional $ 25.00 and must be included with payment.
You will need to send your core directly to the manufacturer. This will keep from having additional shipping charges by not sending them to me. Pm or email me for the address of the manufacturer.
At this time it is looking to be approximately a three month lead time for turn around. Your finished pad will be shipped directly from the manufacturer to you. Return shipping will run $35.00
Total to me is $499.00 plus color charge of $25.00 if necessary.
Loren
Good news! Thanks again for organizing this.
So what happens if we don't get all 12 people to fully commit and send the money to you? Is the deal off? Will you then refund the money to everyone?
Should we set a time period for people to get the money sent in?
John
-
John,
I am certain this will see the finish line.
But should it not get the twelve, yes, you would get your investment back. I know many of the individuals personally that have signed up to make this happen.
Time is important, the manufacturer is in the stages of finishing up the current job they are on now and getting the finances to them in the next week or so would put our project in place for the next job on their schedule.
I have the pad that will be used for the mold, boxed and will go out to the manufacturer tomorrow. They will start once the payment for this initial run is in their hands.
Loren
-
PayPal sent.
Thanks Loren!
Chuck
-
PayPal sent.
Thanks Loren!
Chuck
Chuck,
Thank you for your participation and prompt payment.
Loren
-
Loren
PM sent
-
PayPal sent.
Thanks Loren!
Chuck
Chuck,
Thank you for your participation and prompt payment.
Loren
X2...thanks for putting this together and we should be updating our resto pics soon. Car is in my friends paint booth as we speak.
-
Loren
PM sent
Replied
Loren
-
X2...thanks for putting this together and we should be updating our resto pics soon. Car is in my friends paint booth as we speak.
[/quote]
Dan,
You are welcome.
In a sense it is kind of fun making this come together. I've always wanted to do a project for our Buick community. Looked into doing the steering wheels 25 years ago, just couldn't get the dots connected to make it happen.
Wheelz tried to make this go, but didn't get enough response to get it underway. So I thought I would see if the time was right and here we are.
I thank everyone that has stepped forward to get this task done. It is a big commitment for us all.
Post some pics of that fresh paint for us to be jealous of. Thanks for the quick payment.
Loren
-
Wow what a great project ! Wish I had a good core and extra$ for this right now!
-
Wow what a great project ! Wish I had a good core and extra$ for this right now!
What is required for a good core is that it can not have rust holes, the two threaded studs and all the mounting clips intact.
The condition of the foam and vinyl are not important. The original pad will be stripped down to the metal base. Then new foam and correct grain vinyl will be installed.
The pads will be manufactured in black with an option to have them dyed to your preference for an additional $25.
Loren
-
Loren
Check in the mail today.
Milton
-
Loren
Check in the mail today.
Milton
Thank you Milton.
Loren
-
Loren
PM sent
-
Loren
PM sent
Reply sent along with my appreciation.
Thanks ,
Loren
-
Loren,
I'm in, email sent to you. I will leave the clips, I finally read all the pages of this post.
Thanks again for getting this going.
Regards,
-
Loren,
I'm in, email sent to you. I will leave the clips, I finally read all the pages of this post.
Thanks again for getting this going.
Regards,
You are welcome Jim and thanks for coming onboard . Got the email.
Again thanks,
Loren
-
Serves me right for not checking in on the forum in the last couple months.
Any way to get another in or is 12 the limit?
Thanks Loren!
Tony
-
Serves me right for not checking in on the forum in the last couple months.
Any way to get another in or is 12 the limit?
Thanks Loren!
Tony
Tony and other members in need of a dash pad,
There is no maximum limit to this project . You need a core pad that has no rust holes, surface rust is ok. The clips and the studs must also be intact.
Thanks for asking,
Loren
-
Ok, count me in! I need dark blue. Trim code is medium blue. Kick panels, dash pad and package tray were dark blue in this combo.
I re dyed the one that I had. Looks ok but have some imperfections.
Thanks,
Tony
-
Ok, count me in! I need dark blue. Trim code is medium blue. Kick panels, dash pad and package tray were dark blue in this combo.
I re dyed the one that I had. Looks ok but have some imperfections.
Thanks,
Tony
Tony,
Got your pm, reply sent.
Is the color on your pad , the color you want the new pad ?
I think I need to look at my dealer information again, lol There must have been more than one blue ? Very interesting, the blue pad I have is a medium color.
Loren
-
Thank you to everyone that has signed on to this project.
We made the minimum quantity to get this rolling and I have received payments from approximately half of the people involved. I need to get the payment on the way to the manufacturer ASAP.
Please help me out getting over this close to last hurdle. Send a pm for payment and shipping information.
Thanks,
Loren
UPDATE !
Hold off for a little bit to ship your core pad. Rollaround has a good suggestion for a standardized form to send with your core.
Loren
-
Loren, count me in also. Please PM me your address and I'll put a check in the mail.
Is there a timeline for shipping our cores to the vendor? Any additional guidance on shipping, paperwork, job number, tracking info?
Thanks for carrying this flag up the the long slippery hill.
-
Loren, count me in also. Please PM me your address and I'll put a check in the mail.
Is there a timeline for shipping our cores to the vendor? Any additional guidance on shipping, paperwork, job number, tracking info?
Thanks for carrying this flag up the the long slippery hill.
Hey Kevin,
Thanks for jumping in.
I got your PM and sent a reply. I'll send a follow up for payment and shipping information.
You are welcome and I appreciate your participation in this,
Loren
-
Loren , check is in the mail . also sent you a pm .
-
Loren , check is in the mail . also sent you a pm .
John,
"check is in the mail" heard that one before. lol
Really though, Thanks for quick payment. Got the pm.
Loren
-
Hi Loren,
Sorry for the delay I can send you a check or I can use PayPal.
Let me know what you prefer. If you want a check give me your address. I also need the address where to send the core.
Thanks again for all your help
Joe
-
Hi Loren,
Sorry for the delay I can send you a check or I can use PayPal.
Let me know what you prefer. If you want a check give me your address. I also need the address where to send the core.
Thanks again for all your help
Joe
Good morning Joe,
PM on the way. Many thanks for joining in with this project. It is a first step to having a source for someone needing a dash pad in the future.
Loren
-
Hi Lauren, I have ppg paint code for that dark blue to cross if needed when I "refinished" and re-dyed the one in the car..
Thanks again!
Tony
-
Loren,
I have removed my dash pad in anticipation of shipping it out to the manufacturer and it appears in good shape, however it does appear that a previous owner has repaired one of the studs with JB Weld. It is still intact and sturdy. I hope this will not be a deal breaker?
JimL
Update: I took out the stud cleaned things up and tack welded a new stud in. I should be good to go!
I think that should be good.
Loren
-
Loren:
Check to you went out in Friday's mail. Dash pad shipped to Premier via UPS today. Thanks.
-
Loren:
Check to you went out in Friday's mail. Dash pad shipped to Premier via UPS today. Thanks.
Thanks Dan!
Loren
-
Does Premier have a website? Thanks
-
Does Premier have a website? Thanks
No they don't
Loren
-
Please use the attached PDF Form for sending your dash pad core. Print and fill out PDF form, then include with your core.
Thank you,
Loren
-
Please use the attached PDF Form for sending your dash pad core. Print and fill out PDF form, then include with your core.
Thank you,
Loren
What if we already mailed our core? Should I send this form in in an envelope?
-
Please use the attached PDF Form for sending your dash pad core. Print and fill out PDF form, then include with your core.
Thank you,
Loren
What if we already mailed our core? Should I send this form in in an envelope?
If you included your return address, I think it will be fine.
Loren
-
Guys, its been a real long time since I've visited this site. CONGRATULATIONS to Loren for promoting/engineering this...something I tried a while back but had no serious interest. Did I read it correct that this manufacturer is in Tampa?
Someone send me the link and IF I can somehow be of assistance, just say the word!
Wheelz, Tampa Bay
-
Wheelz,
Thanks for the kudos. It has been an interesting adventure getting this kick started again.
I sent the commitment payment today to the company that will be redoing the pads.
PM sent
Loren
-
Wheelz,
I sent the commitment payment today to the company that will be redoing the pads.
Loren
"commitment payment"
Does that mean you have received the full payment for at least 12 pads?
Is DPP following up with you verifying that they have received cores from everyone who has made a payment?
Also, Can I expect the new dash pad I receive will have been made from my original core or someone else's.
John
-
Reality, I sent full payment for the 12 and I am waiting for a couple of payments to come in.
At this point, the manufacturer only has what I sent for the mold pattern to be made from. Also, some of the payments that I have received did not include the personal information I requested be sent to me.
Having names and addresses is the only way I can confirm what pads the manufacturer has.
I will ask about the pad that would be returned.
Loren
-
Also, Can I expect the new dash pad I receive will have been made from my original core or someone else's.
Getting my same core back that I sent in is important to me. Thanks
-
Also, Can I expect the new dash pad I receive will have been made from my original core or someone else's.
Getting my same core back that I sent in is important to me. Thanks
I have no way of controlling this.
If it is imperative that you get "your" original base back, now is the time to reconsider moving forward on your part.
I'm gaining nothing financially out of this and have a considerable time investment, along with four pads that are committed to get this underway.
I don't even get my cores back or compensation for them.
Loren
-
Not sure what the importance of getting your original pad back would be.
Have personally replaced several dash pads and have never had a problem with one that doesn't fit properly. So, since everyone is supposed to have sent in a good pad base - that is the metal part of the pad as all the rest will be destroyed to make the new pad - why is it important to get 'your' base returned ? :dontknow: Not being critical, just trying to understand.
Dan
-
No offense taken by anyone... I'd like my pad back because I know it is an excellent rust-free desert core with all screw inserts, no welded studs (see prior posts) and no other repairs. I labeled my core with my name prior to sending it in. I've also mailed a note to Premier (with a photo) explaining my desire to receive my original core. I've attached a picture of the core I sent in, in case anyone receives mine. I'm not going to lose sleep over it, but there you have it. Thanks everyone.
-
Thanks for helping me understand. That is a nice rust free core. Hope you get it back.
Dan
-
Thanks for helping me understand. That is a nice rust free core. Hope you get it back.
Dan
Thanks Dan.
So if anyone receives my core (labeled "65 Lark" in white paint), I will pay the shipping to swap out pads. THANK YOU
-
Does anyone know the process that these dash pads go thru to get restored ?
I would think that the metal backing must go thru some kind of cleaning process making it hard to even tell which was which .
maybe someone has had one done before that can shed some light on this .
I know mine was very nice except for 2 very small cracks in the vinyl , I was even hesitant to send it in as a core but figured I,d rather get it done now rather than later .
Thanks again Loren for making this happen .
-
I communicated with the manufacturer in regards to getting a specific pad returned.
The reply was:
It can get hard keeping track of customers cores. The cores all get stripped and inspected. A core with no major issue then goes on the shelves to be used.
If bad or marginal, we [ PMI ] contact the customer and ask what they would like to do.
If a customer insists on getting their original core back, we [ PMI ] charge a fee to walk a core through the plant because it requires additional time outside of the normal process.
So, with additional cost, it is possible to get a specific core returned to the person that sent it in.
Loren
-
Thanks for all the legwork on this Loren,
I etched my email,s.s. Number,address, mothers maiden name, VIN number,and password for 65gs.com on the back,but I guess if I get another one back I will assume someone got mine. But really,I do get it that no one wants a rusty pad back. I am sending mine in this week so if you have a questionable core I do have a few.
-
I communicated with the manufacturer in regards to getting a specific pad returned.
The reply was:
It can get hard keeping track of customers cores. The cores all get stripped and inspected. A core with no major issue then goes on the shelves to be used.
If bad or marginal, we [ PMI ] contact the customer and ask what they would like to do.
If a customer insists on getting their original core back, we [ PMI ] charge a fee to walk a core through the plant because it requires additional time outside of the normal process.
So, with additional cost, it is possible to get a specific core returned to the person that sent it in.
Loren
Thanks Loren,
I'm just asking questions so we all have a clear understand of the process and know one is disappointed.
Its always nice to get the same core back because you know it fits your car but its not a deal breaker for me.
My pad should be shipping out soon.
-
Hi all,
I would imagine that the core would have any rust removed prior to the new pad being molded to it.
I know no one wants to get a nice pad with a rusty surface to mount to.
Also I would think any corrosion would intefer with the molding process.
Loren,
Am I under the correct understanding?
Regards,
-
Hi all,
I would imagine that the core would have any rust removed prior to the new pad being molded to it.
I know no one wants to get a nice pad with a rusty surface to mount to.
Also I would think any corrosion would intefer with the molding process.
Loren,
Am I under the correct understanding?
Regards,
First off, I understand the concerns brought up here. This venture is a bit beyond things I've previously attempted and didn't anticipate some of those concerns.
I also didn't consider the time investment on my part with all the emails and PMs. Oh well, it is what it is.
From the conversations I've had with Premier, after the pad has been stripped to the base metal, it is cleaned and inspected. The process of cleaning wasn't covered in depth, but it seems there isn't hours spent on the cleaning.
One of the pads I sent in had a fair amount of deep rust but no holes. I was told that one would be in the "contact customer" category. I failed to take pictures prior to shipping, sorry.
At this point, I hope that when it is all done, everyone is satisfied.
Loren
-
There is a video on youtube of the process used by Just Dashes. DPP may do the process differently.
Looks labor intensive and the specialized equipment explains the high cost!
https://www.youtube.com/watch?v=gi0zbqNau-4 (https://www.youtube.com/watch?v=gi0zbqNau-4)
DPP does offer a repo '67 Skylark/GS pad for $425. Unfortunately for us '66 owners, 66 and 67 pads are different.
-
First off, I understand the concerns brought up here. This venture is a bit beyond things I've previously attempted and didn't anticipate some of those concerns.
I also didn't consider the time investment on my part with all the emails and PMs. Oh well, it is what it is.
At this point, I hope that when it is all done, everyone is satisfied.
Loren
Loren:
I wanted to publicly thank you for all your hard work and efforts on this project. :cheers2:
Best,
Dan
-
Thank you Dan.
Loren
-
They're going to be great Loren!
Better than any repro made before.
Oh wait. This IS the only repro ever done before, because YOU made it happen!!!
You're awesome!!!! :occasion14:
-
Hi all,
I would imagine that the core would have any rust removed prior to the new pad being molded to it.
I know no one wants to get a nice pad with a rusty surface to mount to.
Also I would think any corrosion would intefer with the molding process.
Loren
Am I under the correct understanding?
Regards,
I would say you're right Jim,and there has to be some type of de-rusting/cleaning process. I just got mine sent out today and I really did etch my name in it. It was a nice core,but I don't think it was as nice as the one pictured above. I think from past experience that they would simply reject a core if it was not to their standard. It is my guess that they will want to retain a certain number of cores once this project starts and I think we will benefit from this initial run because none of us are sending in junk ones so there are no overruns available at this point.
-
Loren my checks in the mail and FedEx has my core.
It takes courage to enter into uncharted waters, thanks for taking us were we need to go.
-
Dear Loren and mid-60 Buick "sensitive" types,
Thanks Loren for being a greater diplomat than often see in government these days. Thanks guys for working this out. In a way it says a lot about all of us. What it boils down to is that we really care about our cars and want the best for them! :love4:
That's the spirit guys! :icon_thumright:
Cheers, Edouard :occasion14:
-
Loren my checks in the mail and FedEx has my core.
It takes courage to enter into uncharted waters, thanks for taking us were we need to go.
Thank you Kevin
Loren
-
Sent my core off yesterday
-
Loren ,
Check is in the mail and sent the core off yesterday .
-
Loren ,
Check is in the mail and sent the core off yesterday .
John,
I received the check, thanks.
Loren
-
Sending in core today. Didn't know this project was started by Wheels way back when!
Thanks Loren for getting it to the finish line!
Bob
-
Hello Loren
Just to let you know I sent my core and Jim's core in they will receive it on Tuesday.
Thanks again for all your help
Joe
-
Sending my core today by FedEx. Also etched my name in the metal, since it's in extremely nice condition. One advantage of an air conditioned Skylark sedan parts car.
This will be a very nice core in the pad that one of us gets. This could be fun....kind of like the lottery :-)
Thanks Loren!
Chuck
-
Sending my core today by FedEx. Also etched my name in the metal, since it's in extremely nice condition. One advantage of an air conditioned Skylark sedan parts car.
This will be a very nice core in the pad that one of us gets. This could be fun....kind of like the lottery :-)
Thanks Loren!
Chuck
Nice indeed. Thanks Chuck.
If you are interested and thought you missed out, there is still time to get in on this.
Loren
-
Thanks to All,
I've been out of town for almost a week, as some of you figured out.
Anyways, if I missed acknowledging receiving your payment, I apologize. With that said, all payments are in and I thank everyone .
Now we are on the hurry up and wait cycle. lol
Loren
-
Loren
I have seen that the dashpad.pdf was downloaded 48 times.
Do you know how many pads are actually being done??
JimL
-
Loren
I have seen that the dashpad.pdf was downloaded 48 times.
Do you know how many pads are actually being done??
JimL
Jim,
There is a total of 15 members that are in presently.
Have no idea why it would be downloaded so many times.
Loren
-
I, for one, downloaded it twice not remembering that I had done it the first time. That's one extra.....
Chuck
-
I can account for one additional down load, I misplaced the first one. It might be with my 1/4" socket or the AC compressor bracket I haven't been able to find.
Of all the things I've misplaced, I miss my memory the most.
-
Loren
I have seen that the dashpad.pdf was downloaded 48 times.
Do you know how many pads are actually being done??
JimL
It's very possible I downloaded it just out of curiosity. :laughing7: :cheers2:
-
If you are interested and thought you missed out, there is still time to get in on this.
Loren
Loren,
What's the deadline?
Mark
-
If you are interested and thought you missed out, there is still time to get in on this.
Loren
Loren,
What's the deadline?
Mark
I will inquire with the manufacturer.
Loren
-
Thanks Loren!
Mark
-
If you are interested and thought you missed out, there is still time to get in on this.
Loren
Loren,
What's the deadline?
Mark
I will inquire with the manufacturer.
Loren
Got a reply back already. Premier is leaving it open at this time in an effort to have a larger run.
My thought is, members wanting to get a pad redone, should be in by the end of the year. That way it shouldn't hold things up.
Loren
-
I'm in for one in black. Let me know how to proceed! Thanks for the leg work on this!!
-Keith
-
Hi Keith,
You will need a good core to start with.
The core is stripped to the metal base, new foam is applied and then covered with new correct grain vinyl. Your core needs to have all the clips, both threaded studs and no bad rust. Surface rust is ok, that is cleaned off.
I am handling the money end. You can pay either a personal check or Paypal. If you use PP, add 3% for their fee.
I will PM you my address, the form to go with your core and the shipping information if you want to go forward.
Black dash pad $464.00
Return shipping $ 35.00
_______
Total $499.00
If you don't have a good core, there is an additional charge of $165.00
Loren
-
What's the turnaround time on this?
-
They are working on the mold now.
Estimated turn around at this time is early February.
Thanks for your interest,
Loren
-
Ok. Great. Car goes in to the exhaust shop next Tuesday, so I wouldn't be able to pull the dash pad until after thanksgiving I'm guessing....that's not a problem is it?
-
Bud,
No problem !
Loren
-
Got the dash out and boxed up.....next steps??
-
Hi Keith,
Include the form from post #95, dashpad.pdf, with your dash pad. Shipping address is on the form.
PM sent with payment information.
Thank you ,
Loren
-
One of my threaded studs is loose....still there, just loose. Do I need to have it welded in before I send it out? Also, do they do the armrest pads too? I need those done....
-
It would be best to secure the stud.
I have been in communication with them about redoing the arm rest pads. They are very interested in doing the arm rest pads.
I will be pursuing this in the near future. I plan to do it like the dash pad project.
I will post some more on the arm rests as it progresses.
Loren
-
I'll get the stud secured tomorrow, and get the dash shipped out Monday. Thanks for setting all of this up Loren. I/we appreciate how much work something like this can be.
-Keith
-
I have been in communication with them about redoing the arm rest pads. They are very interested in doing the arm rest pads.
I will be pursuing this in the near future. I plan to do it like the dash pad project.
I will post some more on the arm rests as it progresses.
Loren
Its good to hear that you are going to take on an arm rest pads project as well. When the time comes, I'll be in on that as well!!
JimL
-
Does anyone reproduce the 14" armrest bases??
-
Are 66 armrests the same?
-
Couldn't tell you....I'm WAY too new to these cars...lol
-
Are 66 armrests the same?
That is a tricky question, because it will depend upon year, model and trim level.
The arm rest that is used in '65 Skylark and Gran Sport convertible and hardtop models was also used in '64 to '67 models. The sedan [ post ] model used a different style arm rest.
Picture of the style arm rest is attached.
Loren
-
More pictures
-
Does anyone reproduce the 14" armrest bases??
Unfortunately, no there is not a reproduction of the 14" plastic base made.
Originals can be re-chromed, but you need good ones to start with.
Loren
-
Any update on the Dash Pads? Are they still on schedule for February?
-
Nothing as of today.
Loren
-
Hi I am sorry to join this late. I am interested in getting my Dash Pad recovered and also arm rests recovered. The dash pad project looks like it went well and thanks eveyone for all the updates I read. Will this company do more dashpads in the future is it too late to send one to them? Please update me when possible. Thank You
Tony
-
It's pert-neer February. Still crickets?
-
I too am getting anxious.
Today, I called PMI to check up on the progress. We still do not have a delivery date as of today. I am told it is being worked on and they have an extended time that they are down starting with the holidays.
Hope to hear something soon,
Loren
-
Hi I am sorry to join this late. I am interested in getting my Dash Pad recovered and also arm rests recovered. The dash pad project looks like it went well and thanks eveyone for all the updates I read. Will this company do more dashpads in the future is it too late to send one to them? Please update me when possible. Thank You
Tony
Tony,
First, my apologies for the long delay in a reply.
Today I called PMI to inquire on the progress. I am still working to get the dash pad project finished and hope to have it completed in the near future.
In answer to being available in the future, Yes . I will be a vendor for them.
At this time, I have not moved much further with the arm rest pad. In short, one adventure at a time.
Loren
-
Thanks Loren, I appreciate the update. I am interested in getting my dash pad done and also the armrests. I will continue to watch for updates. Thanks again.
Tony
-
Stay tuned! :rocker:
Loren
-
Loren, I have 2 dashpad cores... :thumbsup: in case you need more!
Wheelz, Tampa Bay
-
Loren, I have 2 dashpad cores... :thumbsup: in case you need more!
Wheelz, Tampa Bay
Thanks Dennis,
Loren
-
Another in line for the armrest pad project.
Thank you.
-
I'm starting to get worried that we don't have a start date yet when they originally estimated completion in February. They've had these things an awful long time.
-
I agree with you and I have contacted them again.
Loren
-
Loren
PM Sent
-
Got it.
Loren
-
I spoke with PMI today. I was told the first mold did not turn out a good product and they are working to correct it.
I realize we are now into mid February and we expected to be seeing delivery. I'm told it will be a few more weeks yet. I appreciate your patience, it looks like they are doing everything to give us a quality product.
Loren
-
Thanks for the update Loren .
I,m glad there being up front about the quality anyway . I would rather wait a little longer and have a quality product than get something i,m not happy with .
-
These things always take longer than expected, I did not order one but I have been following along and thought their February estimate was extremely optimistic.
-
Thanks Loren
-
Thanks for the update Loren,
I wish I only needed that pad to complete my interior,I just got my Legendary parts and the fun begins.
-
Loren
I will definitely choose quality over speed.
I intend to keep my car a long time and I don't want to be looking at my dash as I slip behind the wheel thinking it should have been done better.
Thanks for keeping on top of this.
Milton
-
Any updates?
-
Dear Turbonut85 and mid-60s Buick "interior decorators," . . . .
Any updates?
Loren is recovering from emergency eye surgery and so he might be a bit slow to respond to your question. Here is the thread announcing the surgery:
http://65gs.com/board/index.php?topic=3311.0 (http://65gs.com/board/index.php?topic=3311.0)
In the meantime don't forget to have . . . . . (http://www.canebas.org/WeatherCat/Forum_support_documents/Custom_emoticons/patience_emoticon.jpg)
Cheers, Edouard :occasion14:
-
Had no idea about Loren's surgery....I wish him a speedy and uneventful recovery.
-
All,
Thanks for your patience. I still have no update for you-all.
Loren
-
:hello2:
Today I received an email from our dash pad company.
Loren,
We just got a core in for Keith Smith is he on the list..Dropped of a small amount of extra materials mold maker needed to finish up.Mold will be done in 3 weeks or sooner.All pads on open list will ship out in April.Sorry for the delay.
Thanks Alan
-
I hope they didn't just receive my core...I sent it in December...lol. Glad to have an update though!! :headbang:
-
Dear Loren and mid-60s Buick interior decorators,
We just got a core in for Keith Smith is he on the list..Dropped of a small amount of extra materials mold maker needed to finish up.Mold will be done in 3 weeks or sooner.All pads on open list will ship out in April.Sorry for the delay.
Glad to hear of the progress! Be patient guys you'll be glad you were! :angel4:
Cheers, Edouard :occasion14:
-
:thumbsup: :thumbsup:
-
It's April! :hello2: Any news if they are shipping...
-
I have not heard anything as of yet. Hang in there please.
When we started this project, I thought the most difficult part would be getting enough commitment to make it happen. I've come to the conclusion that the wait is even more difficult and given the extended time it is taking even more so.
Loren
-
You're absolutely correct Loren, I feel like a little kid three days before Christmas.
-
Dear Black wedge, Loren, Kevin, and impatient mid-60s Buick owners,
Hey guys, time to chill out a little.
Working on classic cars has been definitely improved by the existence of the Internet, but nonetheless, the pace of projects related to classic cars remains stubbornly the same. It is the nature of the beast, because in part, these parts have to fabricated in the old-fashioned way that they originally made in 1960s. So we all need to cultivate our patience. If you don't, owning a classic car will drive you crazy! :tard:
Cheers, Edouard
-
Dear Black wedge, Loren, Kevin, and impatient mid-60s Buick owners,
Hey guys, time to chill out a little.
Working on classic cars has been definitely improved by the existence of the Internet, but nonetheless, the pace of projects related to classic cars remains stubbornly the same. It is the nature of the beast, because in part, these parts have to fabricated in the old-fashioned way that they originally made in 1960s. So we all need to cultivate our patience. If you don't, owning a classic car will drive you crazy! :tard:
Cheers, Edouard
No worries. I'm chilled out. Just inquiring on the latest status and looking forward to getting my dash pad..
-
I don't think anyone is impatient in a negative way....everyone in this deal has a good amount of $$$ invested, and it's getting closer to the car season for those of us that live in the fridgid parts of the country. Telling people to chill out when they are inquiring about a project that they have 1) paid for in full ahead of time, 2) are inquiring around the projected timeline, and 3) haven't had much as far as communication from the vendor.....I feel is counterproductive. But that's my personal opinion. I would be inclined to say I am more excited...than impatient. Lol. Happy motoring to all! ;)
And a continued big thanks to Loren on this entire project.
-
I have not heard anything as of yet. Hang in there please.
When we started this project, I thought the most difficult part would be getting enough commitment to make it happen. I've come to the conclusion that the wait is even more difficult and given the extended time it is taking even more so.
Loren
https://www.youtube.com/watch?v=QTlAwS4Cl24 (https://www.youtube.com/watch?v=QTlAwS4Cl24)
-
Yep,
These things take awhile...not exactly "Free Falling" off the shelves,but "Even the Losers" get lucky sometimes and may think "I Need to Know",but I still think "You got Lucky" when this started because at the end of the day we're just "Runnin' Down a Dream" on our old "American Girl". "I Won't Back Down" even if I was told "Don't Come Around Here No More" because they will be nice.( I think I'm running out,but I'm sure there's more)...
-
Dear Black wedge, Loren, Kevin, and impatient mid-60s Buick owners,
Hey guys, time to chill out a little.
Working on classic cars has been definitely improved by the existence of the Internet, but nonetheless, the pace of projects related to classic cars remains stubbornly the same. It is the nature of the beast, because in part, these parts have to fabricated in the old-fashioned way that they originally made in 1960s. So we all need to cultivate our patience. If you don't, owning a classic car will drive you crazy! :tard:
Cheers, Edouard
I'm going to go ahead and state the obvious. Everyone has been extremely patient.
-
Dear Buick_65 and mid-60s Buick "patient" types,
I'm going to go ahead and state the obvious. Everyone has been extremely patient.
Uh, the ultimate test of patience is circumstances like this: . . . . .
http://65gs.com/board/index.php?topic=2610.msg23873#msg23873 (http://65gs.com/board/index.php?topic=2610.msg23873#msg23873)
Just another mile in my shoes . . . . .
Edouard
-
Try owning/modifying a hot air turbo buick if you want an excercise in patients....lol :BangHead:
-
do we know if they have had any successful runs yet? Or have shipped anything??
Thanks,
-
I spoke with PMI yesterday..... again.
I am told that they will start producing them next week. If some one needs it soon, let me know and we will start with those.
Thanks for all of your patience. This has taken much more time then originally thought.
Loren
-
Please put others ahead of me. I am not currently in need.
Sent from my XT1585 using Tapatalk
-
Please put others ahead of me. I am not currently in need.
Sent from my XT1585 using Tapatalk
Thanks Chuck for letting us know.
I am certain that there are guys that are in need for the car season.
Loren
-
I,ll need mine ASAP ,
All I have left to do to finish my car is repair 12 more rust holes , all the mud work , block sand 4 or 5 times , paint everything , sand and buff , install the interior, rebuild the engine , put the new vinyl top on and buy the exhaust .
Hoping to have it done by May and debut it at Robs party . LOL
on 2nd thought Loren you can send mine out right behind Chucks !
-
Chuck, John and those that need motivating,
I thought that if the dash pads would have made the February finish line, you all would have been more serious about getting those cars done. lol
Loren
-
Chuck, John and those that need motivating,
I thought that if the dash pads would have made the February finish line, you all would have been more serious about getting those cars done. lol
Loren
We'll, I didn't anticipate more time away from the car than with it so far this year...[emoji15]
Sent from my XT1585 using Tapatalk
-
Thanks Loren,
Put me down with a few others....John,Chuck,Kevin,not to mention any names that are not exactly "needing" it today,Dan
-
Thanks Dan, I will make a note of that.
Loren
-
Loren
Lost BCA Nationals points in Springfield MO so prefer to have new dash installed before BCA Nationals in Brookfield if possible.
As always I prefer right to fast.
Thanks again Loren for taking this on.
Your doing a great job.
Milton
-
I just hope I'm actually on the list...lol.
Sooner the better for me...got lost of plans that are coming up fast....
Thanks again Loren.
-
I just hope I'm actually on the list...lol.
Sooner the better for me...got lost of plans that are coming up fast....
Thanks again Loren.
Yes Keith, I have you on the list and will notify PMI.
Thanks,
Loren
-
Today I got an email and a phone call from Alan at PMI.
They have not shipped any pads yet. That's the bad news, but the good news is Alan will be shipping a pad to me to check fit for approval.
Thanks for hanging in there,
Loren
-
I received a couple of pictures today from PMI.
Loren
-
:headbang: :hello2: :occasion14:
-
:headbang: :hello2: :occasion14:
X2
Loren
-
:headbang: :hello2: :occasion14:
X3
Loren
Are you still going to receive one for final approval?
Let the shipping begin!!!!!!!!
-
Yes Jim, that is what Alan told me.
Loren
-
Dear Loren, Turbonut85, JimL, and mid-60s Buick owners who love pretty well done products that are - well - pretty!! :thumbsup:
I received a couple of pictures today from PMI.
Looks really good Loren! If you approve, I'm sure nobody will be disappointed!
Cheers, Edouard :occasion14:
-
Looks great Loren , you can just bring mine with to Robs place this weekend and I,ll pick it up there . :laughing7:
-
Any ideas as to what the price is going to be for a dash pad from them? Mine is shot so I'll be needing one but would prefer not to pay a just dashes price for one if at all possible. Thanks!
-
Any ideas as to what the price is going to be for a dash pad from them? Mine is shot so I'll be needing one but would prefer not to pay a just dashes price for one if at all possible. Thanks!
I do not have an exact figure as of today. The retail price will be under $500 though. Once the original 16 pads are done, I am thinking of having a few more done in order to have a reasonable turn around.
If it had not been for the guys that stepped up to get this project rolling, this would not have come about.
I want to thank all those individuals for helping to get this accomplished. :cheers2:
Loren
-
The biggest thanks goes to you Loren.
-
The biggest thanks goes to you Loren.
X2 :hello2:
-
Awesome Loren!!
Thank you!!
Tony
-
Thanks Loren!!!
-
Hi Everyone,
We got home from the trip to the Great up North last night a little after 10:00 PM.
Waiting for me was the first dash pad from PMI. This morning, I took it out of the box and bubble wrap. I've looked it over and will say, it was worth the wait for the corrections done to the mold. Grain is correct and looks excellent!
I removed an original pad from one of my cars this morning and did a test fit. Before removing the original pad, I took pictures to compare to the new pad for fitment. In my opinion, we could not have gotten a better product.
Since I was out of town, production was held up for a few days. Alan told me they will start the run next week and start shipping them.
. Loren
-
Any ideas as to what the price is going to be for a dash pad from them? Mine is shot so I'll be needing one but would prefer not to pay a just dashes price for one if at all possible. Thanks!
Price will be $425 for black, plus shipping and a good core exchange.
Add $25 for color change
Loren
-
Kudos, Loren. Your persistence has paid off for all of us. Yeah, some might be a bit upset that the shipments were delayed, but from your description, the quality of the restoration will bring a smile to all of our faces. In fact, I guess I'll have to decide which pad I want to use in my restoration. Nice decision to have to make!
Well done! :occasion14:
Thanks for all that you do!!
Chuck
-
I'm happy that soon a bunch of you are going to have great looking dash pads in your cars!
-
Good to hear the test fit went well! Loren, thanks again for all your hard work!
-
What was the price estimate for these pads going to be?
-
What was the price estimate for these pads going to be?
Re: Dash Pad reproduction for '65 Skylark/ Gran Sport
« Reply #224 on: May 12, 2017, 04:54:41 PM »
Quote from: KCastle65 on May 07, 2017, 02:00:13 PM
Any ideas as to what the price is going to be for a dash pad from them? Mine is shot so I'll be needing one but would prefer not to pay a just dashes price for one if at all possible. Thanks!
Price will be $425 for black, plus shipping and a good core exchange.
Add $25 for color change
Loren
-
Oh the suspense.... :blob7:
-
Oh the suspense.... :blob7:
Me too !
Just sent an email to PMI....... again.
Loren
-
So...What's the Latest?
-
They were planing on producing them this week. I put a wrinkle in that plan though.
The pad PMI sent me to test fit, didn't have the clips installed. So I put some on from another core I have here. Things looked good till a few days latter, I noticed slight raised round spots that aligned with the clips. It appears the foam was pushed up slightly by the thickness of the clip. It wasn't evident right away, unfortunately.
PMI is making a correction to resolve this issue.
That is where it is at , presently.
Loren
-
Thanks for the update!
-
Thanks for the update!
Sorry I don't have better news.
Loren
-
Dear Loren and mid-60s Buick fans of everything fitting "just right!"
They were planing on producing them this week. I put a wrinkle in that plan though.
. . .
So I put some on from another core I have here. Things looked good till a few days latter, I noticed slight raised round spots that aligned with the clips. It appears the foam was pushed up slightly by the thickness of the clip. It wasn't evident right away, unfortunately.
PMI is making a correction to resolve this issue.
Sure the delay is a disappointment to everyone waiting for their dash pads. Still, if they had the choice of waiting a little longer or having those ugly bumps forever - the choice should be clear. No matter how long the delay, having a beautifully restored dash pad in your car will soon make the long wait fade away! :love4:
Cheers, Edouard
-
Sorry I don't have better news.
Loren
[/quote]
Quite the contrary, I find it to be wonderful news. It's reassuring to know the QA process is so thorough. Thank you Loren for taking the additional time to mimic a true installation. :thumbsup: :thumbsup:
BZ to Loren!
-
Loren,
Regarding the clips. The test fit dash pad you received did not have them. Will the finished product come with the clips installed?
-
Loren,
Regarding the clips. The test fit dash pad you received did not have them. Will the finished product come with the clips installed?
I missed this post, sorry for the late response.
That is a good question.
The answer is, if the core was sent with clips, then it will have the clips. That said, if the pad was sent to PMI without clips, then most likely it will not. The clips are not available separately, so PMI can not install clips they were not sent.
Loren
-
The core I sent in had clips. Considering we are not guaranteed to get the exact core back, hopefully the restored pad I receive will have clips.
Has PMI given you you any idea how long the fix will take and when shipping will occur?
Not trying to be a pain...
Thanks
-
So this was waiting for me friday.... :headbang: :rocker: :occasion14:
-
Like Christmas in June! :glasses9:
-
That looks nice!
-
Nice to see deliveries have started. Thanks again to Loren for taking on this project and seeing it through all the challenges on our behalf! :hello2:
Chuck
-
The core I sent in had clips. Considering we are not guaranteed to get the exact core back, hopefully the restored pad I receive will have clips.
Has PMI given you you any idea how long the fix will take and when shipping will occur?
Not trying to be a pain...
Thanks
Sorry , I missed this post.
It is my understanding that the manufacturer is doing everything they can to return the correct cores to the original sender.
The issue has been resolved and production is underway. We should see them coming in the near future. I do not have any more specifics, sorry.
Loren
-
I can say with certainty the one I received it the same one I sent....I recognize the weld I did on the stud before I sent it out.... :cheers2:
-
That pad looks awesome!
Thanks Loren!
Tony
-
Dear Loren and mid-60s Buick perfectionists,
It has been a long wait, but it sure looks like the wait was worth it!
Thanks Loren for spearheading this project!
Cheers, Edouard
-
I can say with certainty the one I received it the same one I sent....I recognize the weld I did on the stud before I sent it out.... :cheers2:
It is a relief to hear. There was some concern in that.
Dear Loren and mid-60s Buick perfectionists,
It has been a long wait, but it sure looks like the wait was worth it!
Thanks Loren for spearheading this project!
Cheers, Edouard
Yes it certainly has been a long time , but we have an excellent result.
My thanks to everyone that came on board to make this happen. I certainly appreciate every ones patience of the long wait.
Loren
-
Very exciting!
-
Hi ALL! I tried to go back into all the messages to find this answer, but I will need to clarify: $425 PLUS $25 core? is this the latest out-the-door price?? Plus shipping of course..
Wheelz, Tampa Bay
-
Hi ALL! I tried to go back into all the messages to find this answer, but I will need to clarify: $425 PLUS $25 core? is this the latest out-the-door price?? Plus shipping of course..
Wheelz, Tampa Bay
$425 for black + your core exchange
$450 for any other color + your core exchange
-
Well it was worth the Wait!! New pad looks and fits excellent! Color match is very close. If I had to nitpick, the paint has some "junk" in it (probably not shot in a dust free environment) and there are some small bumps in the vinyl at the front near the windshield. Both Minor issues that are not seen when installed. Heres some pics..
-
It does look great!
As soon as the first 16 are done, orders will be taken.
Price is $425 for black plus shipping
Add $ 25 for color change
Core charge is $165 if you don't have one or condition is not useable.
Loren
-
Black Wedge, your interior looks great.
-
Black Wedge, your interior looks great.
Thanks! The new Dash Pad was the missing cherry on top!
Thanks again to Loren for organizing this project!
-
Dear Black Wedge, Loren, Jim, and mid-60s Buick with an eye to details,
Heres some pics..
(http://www.canebas.org/WeatherCat/Forum_support_documents/Custom_emoticons/wink_smile_triangle.gif) . . . Ah Ha! I knew you could not be trusted!! That sure doesn't look like a 1965 Buick radio! . . . . . . . (http://www.canebas.org/WeatherCat/Forum_support_documents/Custom_emoticons/big_grin_triangle.gif)
Seriously, what stereo do you have in your car? That looks like a Retrosound model if I had to guess and it looks a lot better than I imagined!
Do tell because I'm extremely curious!
Cheers, Edouard :occasion14:
-
Dear Black Wedge, Loren, Jim, and mid-60s Buick with an eye to details,
Seriously, what stereo do you have in your car? That looks like a Retrosound model if I had to guess and it looks a lot better than I imagined!
Do tell because I'm extremely curious!
Cheers, Edouard :occasion14:
Correct, its a Retrosound radio. I found the sound quality to be much better than Custom Autosound.
-
Dear Black Wedge, and mid-60s Buick audiophiles,
Correct, its a Retrosound radio. I found the sound quality to be much better than Custom Autosound.
Shucks! More temptation! . . . . (http://www.canebas.org/WeatherCat/Forum_support_documents/Custom_emoticons/conscience_smiley.gif)
I've been using Custom Autosound since 1995 and I like their products, but I'm really frustrated with the lack of built-in Bluetooth support. My trusty wagon was the first car in the house to have a Bluetooth stereo, but since then I've upgraded all the other cars and I'm spoiled by the improved support. It is really nice to know what track is playing for example.
Still, the Custom Autosound does look more like a 1965 Buick radio. I added the 1965 "BUICK" buttons and it really looks like it belongs there:
(https://photos.smugmug.com/Biquette/Drive-Train-makeover/Dashboard-before-and-after/i-CHttVQp/0/4006abfd/XL/IMG_3206-XL.jpg) (https://canebas.smugmug.com/Biquette/Drive-Train-makeover/Dashboard-before-and-after/i-CHttVQp/A)
Thanks for the info. :thumbsup: Perhaps Retrosound will make a model with buttons that can be topped with the BUICK lettering or Custom Autosound will finally upgrade their own products. They really are overdue.
Cheers, Edouard :occasion14:
-
Finally got the car back after the headliner debocle....and got a chance to install the new dash pad. Top notch.
-
Thanks guys for posting pictures of your cars. :headbang:
If you are interested in seeing one, I will be bringing the first one to the Nationals at Brookfield , Wisconsin July5-8.
Also Chuck will have the first set of Gran Sport battery cables he is having made. We will have them to check out at the Thursday meeting and the Friday BBQ.
Loren
-
Been quiet for awhile. No other special deliveries and associated photos??
-
I will send another email off to PMI.
Loren
-
Sorry Loren, wasn't prodding for an update. Just hoping to enjoy some more photos of happy customers and project progress.
-
No Worries.
Seems I still need to keep on this. I thought that once PMI had started production, all would be well. There I go,.... thinking again. lol
Loren
-
After the first two Dash Pads were reported delivered every time i saw the UPS truck coming down the street I was hopeful!
Then they would drive right by. 0-(
-
Thanks guys for posting pictures of your cars. :headbang:
If you are interested in seeing one, I will be bringing the first one to the Nationals at Brookfield , Wisconsin July5-8.
Also Chuck will have the first set of Gran Sport battery cables he is having made. We will have them to check out at the Thursday meeting and the Friday BBQ.
Loren
Speaking of battery cables - what is the proper routing of the ground strap? Mine goes from the negative terminal on the battery to the rear stud on the power steering pump. I know that there is a smaller wire that is supposed to go to the body, but don't where that should attach to the body.
-
Thanks guys for posting pictures of your cars. :headbang:
If you are interested in seeing one, I will be bringing the first one to the Nationals at Brookfield , Wisconsin July5-8.
Also Chuck will have the first set of Gran Sport battery cables he is having made. We will have them to check out at the Thursday meeting and the Friday BBQ.
Loren
Speaking of battery cables - what is the proper routing of the ground strap? Mine goes from the negative terminal on the battery to the rear stud on the power steering pump. I know that there is a smaller wire that is supposed to go to the body, but don't where that should attach to the body.
That small gauge wire is attached to the inner fender down near the bottom of the battery tray. There should be a ring terminal on the end of that wire that is screwed into the inner fender.
-
Please Read !
If you removed the clips from your dash pad prior to sending it, they need to be sent to PMI NOW.
The clips MUST be on the metal base before the foam is applied. Installing them latter will cause an issue in the appearance of the pad.
Loren
-
Loren,
The core I sent I had left the clips in place, so am I to assume that I will get the same dash back (with clips and studs)?
Regards,
-
Loren,
The core I sent I had left the clips in place, so am I to assume that I will get the same dash back (with clips and studs)?
Regards,
Yes Jim, you will have clips and studs.
Loren
-
I am still poking PMI, this is the latest reply from Alan.
Jul 30 at 8:08 PM
To
Loren Alexander
Message body
Loren,
All pads should be done by the end of next week...(Not this week/ next)
Thanks Alan
Sent from my iPhone
I understand that as " done by the 11th and shipping to follow"
Loren
-
On a side note: has anyone had issues with the fitment of these pads above the glove box? My glove box door hangs up on the dash pad not allowing it to open. Is it just my install job or do others have this issue??
-
Looking forward to seeing more pictures of the new dash pads installed!
-
On a side note: has anyone had issues with the fitment of these pads above the glove box? My glove box door hangs up on the dash pad not allowing it to open. Is it just my install job or do others have this issue??
I did not find an issue with the one I received. My suggestion would be to loosen the nuts that hold it in place over the glove box door, lift up some and tighten the nuts back up.
Loren
-
Looking forward to seeing more pictures of the new dash pads installed!
X2
Loren
-
I'm sure it's installer error...lol. I'll give that a try!
-
The glove box door can also be adjusted a bit by loosening the screws on the hinge.
Dan
-
Hello Lorren,
I just thought I would check to see how the dash pads are coming? I know it is out of your control, but figured you may have the inside scoop.
Thanks for all your efforts
Joe
-
Hello Lorren,
I just thought I would check to see how the dash pads are coming? I know it is out of your control, but figured you may have the inside scoop.
Thanks for all your efforts
Joe
In Reply #272 - looks like they should be done by August 11, with shipping to follow. :occasion14:
-
Hello Lorren,
I just thought I would check to see how the dash pads are coming? I know it is out of your control, but figured you may have the inside scoop.
Thanks for all your efforts
Joe
Just got home from being out and about today. Lucky for me Dan already got the answer for you.
Loren
-
Got my dash pad yesterday! 😋 Was out of town so didn't open until today. The color match isn't that great, but otherwise it is a very attractive piece. Will need to check fitment when the rain stops, but very pleased thus far.
Thank you Loren for putting this together. These dashpads were a black hole for many of us getting our stuff just right. I appreciate your efforts in helping push my project one step further.
-
Seems to fit nice. Sorry for the crappy picture.
-
Dear Buick_65 and mid-60s Buick caregivers,
Seems to fit nice. Sorry for the crappy picture.
Well, it might not be the best picture, but it is decent enough to get a good idea of the fit. Sure looks very nice to me! :icon_thumright:
Cheers, Edouard :occasion14:
-
Yes, that really looks good!
-
All
Glad to see a gray with white interior.
That's what I ordered.
Better keep a close eye on my front steps.
Milton
-
Just curious how many of us (including myself) are still waiting on their dash pad?
(PS - this post is not a call to action for Loren --- I truly am just wondering how close we are to everyone receiving their awesome dash pad!)
-
Thanks for bringing this back to the top, Dan.
I fired off another email, getting less congenial with my messages.
Loren
-
I'm still waiting for mine to arrive Dan. But I'm a long way from being ready for it.
-
I asked to be last on the list, so when I receive mine, I expect all others will have theirs too. For me it's a spare, so no urgency here.
Chuck
-
I get hopeful every time I see the UPS truck come up the driveway, But I am still waiting for mine also.
JimL
-
All
Still waiting.
Milton
-
Hi Guys,
I don't have mine yet, but like most, I'm not in a hurry for it. The one I have is very good less the small scratch most people can't see but drives me nuts.
Tony
-
Hi all,
Just curious, I too said it was ok to be moved to the bottom of the list, but haven't heard anything or seen any post. And the UPS guy might think I'm stalking LOL.
Any updates to where they are with these?
Regards,
-
Hi All,
I have sent emails to Alan with no response.
His email address is : bourget01@hotmail.com
Loren
-
I just received a call (3 OCT 17) saying my dash pad has been shipped. Should arrive in a couple days; sounds like there all completed.
-
I hope so Kevin. I know i'm on the end of the list, so when I get the call or receive the pad, we'll know they are all heading back to their owners.
:sunny:
Chuck
-
All
Received a call this evening to verify I wanted to have my new dash pad stained gray for my white interior.
I answered yes.
I am encouraged.
Milton
-
Kevin, is that the right date?
-
Written in ‘euro’ format. 3/10/17 = 10/3/17 (Or military format in Kevin’s case).
Dan
-
I just received a call (3 OCT 17) saying my dash pad has been shipped. Should arrive in a couple days; sounds like there all completed.
Sorry for the confusion guys, make that 3 Oct 17. Old habits are hard to brake.
-
Great news!
-
Received a call from FedEx today about a package arriving tomorrow that requires a signature. The tracking number provided showed that the package was shipped from El Paso, TX. That is where the dash pads are being made ! Hoping everyone that ordered a dash pad will be getting one soon.
Dan
-
Received a call from FedEx today about a package arriving tomorrow that requires a signature. The tracking number provided showed that the package was shipped from El Paso, TX. That is where the dash pads are being made ! Hoping everyone that ordered a dash pad will be getting one soon.
Dan
Yippee!!
Loren
-
:hello2:
-
Looking forward to seeing the pictures of these installed in your cars!
-
Me to! :headbang: And want to get a red one done when it's needed!
-
Thats great news to hear that they are getting shipped out .
Even though my car is just sitting idle right now at least there is still some kind of progress being made .
-
Got here bright and early this morning. Thanks Loren !! :blob7:
-
Got here bright and early this morning. Thanks Loren !! :blob7:
Fantastic !! My thanks to all of you for helping to make this happen and for your patience.
Loren
-
To All waiting for they're Dash Pad,
When I got home today there was a FedEx door tag on my door saying that a package was attempted to be delivered but needed a signature from someone over the age of 21.
I tracked the number and indeed it is from Alan Foxx El Paso TX
I called FedEx to have it held at my local FedEx since no one is home during the day.
I'll be picking it up tomorrow.
Pictures to follow!
Yippee!!!
JimL
-
Received my black dash pad last week. Very pleased! Just need to clean out the screw holes.
THANK YOU LOREN!!!!
-
Mine arrived today, very pleased.
Once again, thanks Loren for all your efforts to make this happen.
-
hopefully everyones getting there dash pads soon . I was towards the bottom of the list and I also had a fed ex note on my door also .
Ill be waiting for him tomorrow . :icon_biggrin:
-
Dash pad came today . WOW it looks great . I even had to give it a test fit .
Thank you Loren again for making this happen . I can,t wait till we can get something going on the arm rest pads .
( not that i,m hinting around or anything ) LOL
-
Dang. That thing looks nice. Very nice.
Mark
-
Dear John, Dan, and mid-60s Buick project "voyeurs" . . . . . :laughing7:
Dash pad came today . WOW it looks great . I even had to give it a test fit .
Thank you Loren again for making this happen .
Thanks for the photos! :thumbsup: Nothing stays "shiny and new" like a picture of something shiny and new! (http://www.canebas.org/WeatherCat/Forum_support_documents/Custom_emoticons/yahoo.gif) Remember guys, if you have the moment, take a pic! (http://www.canebas.org/WeatherCat/Forum_support_documents/Custom_emoticons/kodak.gif) We all enjoy it! (http://www.canebas.org/WeatherCat/Forum_support_documents/Custom_emoticons/smiley.gif)
I can,t wait till we can get something going on the arm rest pads .
( not that i,m hinting around or anything ) LOL
(http://www.canebas.org/WeatherCat/Forum_support_documents/Custom_emoticons/wink.gif) . . . Hmm, if I had to guess . . . . I'd call that a definitely giving a hint! . . . . :laughing7:
Cheers, Edouard :occasion14:
-
Really nice John. Now, let's get some paint on that dashboard. And where's the Verde Green??? :laughing7:
All in good time, as I know well!
I haven't heard from FedEx yet, but expect to soon......
Chuck
-
I just got my dash, it looks great can't wait to put it on. Thanks Loren for all your work
Joe
-
Hey Chuck,
We should see them today I think....got a missed Fedex note yesterday. Did you have them do yours in gray?
-
Hey Chuck,
We should see them today I think....got a missed Fedex note yesterday. Did you have them do yours in gray?
Hey Dan,
No, mine is to be done in black. It's a spare. The dashpad on my restoration was in nice shape, so we cleaned and dyed it gray.
I've had no notice or missed delivery indications from FedEx and I'm supposed to get emails from them when delivery is coming. I doubt it will be long.
Chuck
-
Hi All,
I have gone though the list that Alan sent of the pads that have been done and shipped.
As of this post, there are ten pads completed, shipped and received. There are six dash pads to yet be completed and shipped.
Alan has emailed me that the remaining material on the roll of vinyl is flawed and he is waiting for a new roll of material from his supplier.
Thank you , everyone for your patience.
Loren
-
No problem here, Loren. I'll be happy to received a nicely done pad without flaws when he gets it finished. Thanks again for your endurance in getting this to the finish line!
Chuck
-
I was on the list of "don't care when it is done" people and I have received mine. Apparently they are near the end of this run for everyone. I must say thanks again to Loren,and I am confident that everyone will be pleased with the results. This is a quality piece and it saved everybody $$ in the long run.
-
Great news Dan, I'm very glad you are satisfied with it and relieved that we are nearing completion. It has been a long and stressful year.
The work it took to get to the finish line was worth it. I think we are at maybe 5 orders left to fill and three that I decided to have done from the cores I sent.
Loren
-
UPDATE
Reply to my most recent email to PMI.
bourget01@hotmail.com
Today at 12:08 PM
Message body
Loren,
I am pleased so say material is in
And we are finishing the remaining
Pads within a week..Thank them for There patience.
Alan
Loren
-
Nice! It will be good to see some more photos of satisfied customers.
-
UPDATE
Reply to my most recent email to PMI.
bourget01@hotmail.com
Today at 12:08 PM
Message body
Loren,
I am pleased so say material is in
And we are finishing the remaining
Pads within a week..Thank them for There patience.
Alan
Loren
Loren , Thats GREAT news !
Did they say when the arm rest pads would be done ? :laughing7:
-
Loren , Thats GREAT news !
Did they say when the arm rest pads would be done ? :laughing7:
[/quote]
Everyone has been great about this project and has been fantastically patient.
Loren
-
Received an email and spoke with Alan yesterday.
An issue has arisen in that some of the cores were shipped minus the clips or unusable clips. It appears that PMI has had to "rob Peter to pay Paul" up to this point and now short clips to finish the last few pads.
If you can help, it would be greatly appreciated. Picture is of the clips needed.
Loren
-
All
More encouragement!!!!
Just hung up the phone with a call from El Paso TX.
They said they were shipping my 65 dash out today via FEDEX and I should receive it this next week.
It sounds like they are on the move again.
I thanked them for taking on this project because it sure means a lot to us.
Milton
-
Hi Everyone,
Guess what showed up at my door while I was out of town on business? It looks awesome. I had mine painted and they got the color spot on too! Funny thing was I was in Houston and must of crossed paths with the pad an it's way to WI. Funny
Really pleased with this piece.
Loren,
We all can't say enough for the work you did in so many ways for this project!!
I hope this news brings a smile and relief into the weekend for you.
Cheers!
Tony
PS so when are we going to do a hood emblem repro?? :thumbsup:
-
Another happy customer! Excellent. Wasn't there talk of an armrest run too? :thumbsup:
-
Got mine today as well. Color is more brown than the maroon red I was wanting (sent them a different core but included large pieces from the underside of the actual pad to color match to). Will look at it closer in the light of day and perhaps my disappointment will change.
Dwaine
-
It has been a long year , with the exception of myself and one other, all pads have been delivered.
In regards to color, hindsight makes me think it may have been best to have them done by someone local. That may have resulted in a better match. :dontknow:
Overall , Alan did turn out an excellent product from the standpoint of fit and appearance.
My thanks to everyone that came on board to make this happen. I certainly appreciate every ones patience.
Loren
-
Overall , Alan did turn out an excellent product from the standpoint of fit and appearance.
My thanks to everyone that came on board to make this happen. I certainly appreciate every ones patience.
Loren:
I just wanted to thank you again for all your efforts. Very satisfied with my (black) dash pad!
Cheers,
Dan
-
Overall , Alan did turn out an excellent product from the standpoint of fit and appearance.
My thanks to everyone that came on board to make this happen. I certainly appreciate every ones patience.
Loren:
I just wanted to thank you again for all your efforts. Very satisfied with my (black) dash pad!
Cheers,
Dan
Thanks Dan. At least they got the black ones close. lol
Loren
-
Hi all,
Got mine a week before Turkey day, looks very nice though to take a picture of it it looks black, even though its dark blue, won't get to fitting it in the car till next spring most likely as the car went into storage for winter.
Want to thank Loren for all the effort as well as Alan and his company for taking on the project as without vendors willing to take a chance our hobby would soon go the way of the Dodo bird.
Cheers will have to post some pictures when I have a few more minutes
Regards,
-
Hi all,
Got mine a week before Turkey day, looks very nice though to take a picture of it it looks black, even though its dark blue, won't get to fitting it in the car till next spring most likely as the car went into storage for winter.
Want to thank Loren for all the effort as well as Alan and his company for taking on the project as without vendors willing to take a chance our hobby would soon go the way of the Dodo bird.
Cheers will have to post some pictures when I have a few more minutes
Regards,
Thanks Jim !
Loren
-
Loren
Received my white interior dash pad November 16.
I didn't let you know because I wanted to install it to show you how well it fit.
Unfortunately my schedule hasn't allowed it and real winter is upon us.
The dash grain is absolutely perfect and the shape looks really good.
I had my white interior dash colored dark gray like original.
Like you have stated I would recommend having it colored locally for a better match. I still have my original dash installed in my white 65 GS and the new one is black by comparison.
I would also strongly recommend anyone needing one of these dashes talk to Alan.
No one has mentioned it yet but I received a note with my dash indicating Alan was interested in buying additional 65 Buick A body dash cores if anyone is interested.
Loren
I don't know what I can say that hasn't already been said about your involvement with this project but your the best!!!!!!
Thank You
Milton
-
Thank you Milton.
Loren
-
Wasn't there talk of an armrest run too?
Just curious if there was any development on the potential for doing arm rest pads?
-
I have correct dashpad mounting nuts available here: http://65gs.com/board/index.php?topic=4590 (http://65gs.com/board/index.php?topic=4590)
-
I was watching Jay Leno’s restoration blog when this Just Dashes segment came on. Story start with his 63 JagXKE the Just Dashes segment starts about 2/3 the way through.
https://youtu.be/Jb3BQhDFWOI?si=NIQ8bRYd-0GZ-NBk